Sanyo DSR-5009P Hard disk archive area, Hard disk recording areas, Recording area, Archive area

1PREPARING FOR USE

4 Turn the jog dial to select “01” and then turn the shuttle dial clockwise.

“01” flashes (indicating the day).

<LANGUAGE/LANGUE/SPRACHE/IDIOMA> [KEY] ENGLISH

<CLOCK SET> 01-01-2005 SAT 00:00:00

<SUMMER TIME SET>
MODE	:	USE
	WEEK	MONTH	TIME
ON	LST-SUN	03	02:00
OFF	LST-SUN	10	02:00
	<EXT.CLOCK SET>
ADJUST. TIME		01:00

5 Turn the jog dial to select “26” and then turn the shuttle dial clockwise.

The day is set to “26” and the month “01” flashes.

26-01- 2005 WED 00:00:00

6 Use the same procedure to set the month (10), year (2005), hour (08) and minute (30).

When the minutes are set, the cursor moves to the next item.

26-10-2005 WED 08:30:00

zThe day of the week is set automatically.

zThe clock stops during date and time settings.

zThe clock starts counting from 00 seconds.

7 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

Hard disk archive area

The hard disk contains a recording area and an archive area. Refer to P.77 for operations.

Hard disk recorder internal
hard disk capacity display			<RECORDING AREA SET>
		TOTAL CAPACITY		:	1500GB
Hard disk recorder			INTERNAL HDD	:	500GB
			EXTERNAL HDD	:	1000GB
external hard disk		RECORDING AREA		:	80 %
capacity display			AREA FULL RESET	->
		ARCHIVE AREA		:	20 %
[A] Recording area			AREA FULL RESET	->
[B] Archive area	CAUTION: WHEN THE AREA SETTING IS CHANGED,
			THE WHOLE AREA WILL BE INITIALIZED !

Hard disk recording areas

B Archive area

20%

80%

ARecordingarea

[A]Recording area

Recording		Recording method
mode
Normal		When monitoring, recording is
	Manual	performed by pressing the [REC/
recording
		STOP] button.
Timer	Automatic	Recording is carried out in
recording		accordance with timer settings.
		Recording is carried out when alarm
		recording is set to “ENABLED”.
Alarm		Alarm images are recorded in
	Automatic	response to either the operation of a
recording
		switch connected to an ALARM IN
		terminal or to the detection of an
		intruder via motion sensors.
		When pre-alarm recording is set to
Pre-alarm		“ON”, it is possible to record video
	Automatic	from before the occurrence of an
recording
		alarm based on the corresponding
		settings.

[B] Archive area

Recording		Recording method
mode
		This area is used to store important
	Manual	video data copied from the normal
		recording area and/or alarm
Copy	or
		recording area. Changes can be
	Automatic
		made to the recording area to
		determine the capacity. (1% - 99% )

zIf the memory allocations for the hard disk recording areas are changed after recording, all stored recordings are deleted and the hard disk is initialized; accordingly, special care should be taken. (JP.77)

zThe total hard disk capacity displayed on the menu screen may differ from the actual hard disk capacity.

English 21