Sanyo DSR-5009P 119, Expanding Replacing and initializing the hard disk, Switching playback disks

3GENERAL SET

Switching playback disks

When mirroring is set to “ON” and a recording error occurs, change the hard disk used for playback.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “3.GENERAL

SET” and then turn the shuttle dial clockwise.

The <GENERAL SET> screen is displayed.

3 Turn the jog dial to select “5.HDD SET” and then turn the shuttle dial clockwise.

The <HDD SET> screen is displayed.

		<HDD SET>
DISK 1		: 250GB	<- DISK 2		:	250GB
EX-DISK 1		: 250GB	<- EX-DISK 2		:	250GB
EX-DISK 3		: 250GB	<- EX-DISK 4		:	250GB
	DISK INITIALIZE					->
CAUTION : ALL RECORDING WILL BE ERASED!
	MIRRORING		:	ON
	PLAYBACK DRIVE		:	***

4 Turn the jog dial to select “PLAYBACK DRIVE” and then turn the shuttle dial clockwise.

“MASTER” flashes.

	<HDD SET>
DISK 1	: 250GB	<- DISK 2	:	250GB
EX-DISK 1	: 250GB	<- EX-DISK 2	:	250GB

5 Turn the jog dial to select “MASTER” or “SLAVE” and then turn the shuttle dial clockwise.

	<HDD SET>
DISK 1	: 250GB	<- DISK 2		:	250GB
EX-DISK 1	: 250GB	<- EX-DISK 2		:	250GB
EX-DISK 3	: 250GB	<- EX-DISK 4		:	250GB
DISK INITIALIZE					->
CAUTION : ALL RECORDING WILL BE ERASED!
MIRRORING		:	ON
PLAYBACK DRIVE		:	MASTER

[Settings] (‹ indicates default setting)

Setting	Description
‹MASTER	Playback from the master disk.
SLAVE	Playback from the slave disk.

6 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

Expanding (Replacing) and initializing the hard disk

Please contact the dealer from whom you purchased this digital video recorder regarding hard disk expansion (replacement). An external hard disk expansion unit (VA-EXH series) (sold separately) or optional SCSI board and RAID unit can be used with this digital video recorder.

zInitialization must always be performed after expanding the hard disk.

zAll important recordings should be copied to CompactFlash cards or other storage media before expanding the hard disk.

The <HDD SET> screen is displayed in the following manner when hard disk expansion is carried out for the DVR or external expansion unit.

EX-DISK 3 : 250GB	<- EX-DISK 4 : 250GB
DISK INITIALIZE		->
CAUTION : ALL RECORDING WILL BE ERASED!
MIRRORING	:	ON
PLAYBACK DRIVE	:	MASTER

“NEW” is displayed to the right of the hard disk capacity for new hard disks.

		<HDD SET>
DISK 1		: 160GB NEW		DISK 2	: 160GB NEW
EX-DISK 1 : 160GB NEW				EX-DISK 2 : 160GB NEW
EX-DISK 3 : 160GB NEW				EX-DISK 4 : 160GB NEW
	NEW DISK INITIALIZE				->
PLEASE INITIALIZE THE NEW DISK
	MIRRORING		:	OFF
	PLAYBACK DRIVE		:	***
CAUTION : RECORDING SPEED WILL BE
		LIMITED BY MIRRORING !
ALL DISK INITIALIZE					->

To initialize a recently expanded hard disk, select “NEW DISK INITIALIZE”.

To initialize all connected hard disks, select “ALL DISK INITIALIZE”.

zWhen a RAID unit is connected, “ARRAY” is displayed instead of “EX-DISK”.

English 119