Sanyo DSR-5009P instruction manual Network Control, 156, Controlling from a PC

2NETWORK CONTROL

Controlling from a PC

1 Launch the web browser on the PC.

Internet Explorer 5.5 SP2 or later is supported.

These operating systems are supported: Windows 98, 98 SE, Me, NT 4.0, 2000 and XP

zIf no web browser is installed on the PC, install Internet Explorer before proceeding.

zIf the Java Script run-time error message is displayed while

Internet Explorer is being used, modify that application’s settings as follows:

(1)Select [Tools] J [Internet Options] J [Advanced] in order.

(2)Uncheck [Display a notification about every script error] from the [Advanced] screen, and check [Disable script debugging].

2 Enter the unit’s URL.

In the address bar of a browser, enter the IP address to access the digital video recorder and press the [Enter] key.

When connecting the unit directly to the Internet (without a router) set the fixed IP address received from the Internet service provider.

When creating a LAN and setting a private IP address on the unit, the port forwarder settings must be completed for the router. When setting the port forwarder, enter the WAN side IP address in the URL.

Contact the network administrator for more details. (Depending on the device, “Port forwarding” may be called “Static IP Masquerade”, “Address translation”, “Port mapping”, or “Virtual server”.)

zIn the network settings (JP.120), if a value other than “80” is set as the default port value, enter a colon (:) and then the port number after the IP address.

For example, if the port number was set as “60001” you should enter

http://192.168.0.1:60001/

3 Enter a password (for verification purposes).

A verification screen is displayed when accessed. Enter [User name] and [Password] for verification purposes and click the [OK] button.

If the password is incorrect, the password entry screen is displayed again, prompting you to re-enter the password.

zThe following are default settings for user ID and password.

User ID	Password
ID4	4444
ID3	3333
ID2	2222
ID1	1111

Refer to P.112 for details on how to set user level and authorization.

zCheck “ON” for “Remember my password” to save [User name] and [Password]. Verification will be carried out automatically on subsequent occasions. Note, however, that it may not be possible to save a password other than that used for the default connection.

zUp to fifteen PCs can be connected simultaneously to a single DVR. Users at LV3 and LV4 are restricted to one PC, and users at LV2 are restricted to three PCs.

NETWORK CONTROL

156 English