Sanyo DSR-5009P 188, Set Duration to the desired pre- alarm recording duration, 15MIN, Alarm or

3RECORD SET

z100 FPS cannot be selected when mirroring is set (JP.119).

zWhen only one camera is connected, recording is performed at 25 FPS even if 50 or 100 FPS are set.

zWhen two or more cameras are connected and 50 or 100 FPS is set, the actual recording rate is roughly the recording rate divided by the number of cameras. (Example: When 8 cameras are connected and the recording rate setting is 100 FPS, the actual recording rate is 12.5 FPS)

12 Set “DURATION” to the desired pre- alarm recording duration.

[Settings] (‹ indicates default setting)

Setting	Description
5SEC, 10SEC, 20SEC,
40SEC, ‹1MIN, 2MIN,	Records for the set duration.
3MIN, 4MIN, 5MIN, 10MIN,
15MIN

Setting alarm triggers

Use the following procedure to set the alarm triggers (i.e., launch signals), which function as operation conditions for alarm recording.

13 Set “ALARM TRIGGER” to the desired

launch signal for alarm recording.

[Settings] (‹ indicates default setting)

	Setting	Description
‹ALARM		Starts recording when an external alarm is
		activated.
	SENSOR	Starts recording when a motion sensor is
		activated.
	ALARM AND	Starts recording when both an external alarm
		and a motion sensor are activated
	SENSOR	simultaneously.
	ALARM OR	Starts recording when an external alarm or a
		motion sensor is activated independent of the
	SENSOR
		other.

zExternal alarm detection:

This is used to describe input of an external detection signal from a door switch or the like to the unit’s ALARM IN terminal.

zMotion sensor detection:

This refers to detection of motion on the monitor in accordance with motion sensor settings.

zThe motion sensor settings are made on the digital video recorder.

14 Click [SAVE].

The setting is saved.

NETWORK SETTINGS

188 English