Searching within the archive area, Date, Start

Searching within the archive area

Use the following procedure to playback video that has been stored in the archive area.

1 Press the [SEARCH] button while the digital video recorder is recording or stopped.

The SEARCH indicator lights up and the <SEARCH> screen is displayed.

2 Turn the jog dial to select “ARCHIVE AREA SEARCH” and then turn the shuttle dial clockwise.

The <ARCHIVE AREA SEARCH> screen is displayed.

This screen lists the eight most recent recordings in the order in which archiving was performed.

	(1) (2)	(3)	(4)
		< ARCHIVE AREA SEARCH >
	NO DATE	START CH		CAPACITY		(5)
	NO DATE	START CH		CAPACITY
	0000001 20-10 14:15 01			TOTAL -	800MB
	0000001 20-10 14:15 01			TOTAL -	800MB
	0000002 20-10 15:15 01			USED -	105MB	(6)
	0000002 20-10 15:15 01			USED -	105MB	(6)
	0000003 20-10 16:15 01
	0000004 20-10 17:15 01
	0000005 20-10 18:15 01
	0000006 20-10 19:15 01
	MOVE:JOG			SELECT:SHUTTLE
(1)	NO:
Indicates the archive number.
(2)	DATE:
Indicates the date of the recording.
(3)	START:
Indicates the start time for the recording.
(4)	CH:
Indicates the camera number for the stored recording.
(5)	TOTAL:
Indicates the total capacity of the archive area.
(6)	USED:

Indicates the amount of the archive area that has been used.

3 Turn the jog dial to select the video for playback from the list.

zTo display the next or previous screen

Turn the jog dial clockwise or counter-clockwise accordingly.

zPress the [ALARM] button to display the next eight

recordings, and for the previous eight recordings.

zUp to eight recordings can be displayed in the <ARCHIVE AREA SEARCH> screen.

zTo end search mode

Press the [SEARCH] button. The SEARCH indicator turns off.

zSearch also by entering the camera number.

The selected recording is played back on the full screen.

OPERATION

English