Sanyo DSR-5009P instruction manual Advanced Menu SET, 138

<ALARM NOTICE SET>

ALARM NOTICE : OFF SMTP SERVER ADDRESS : USER MAIL ADDRESS : SEND MAIL ADDRESS SET -> SUBJECT :

AUTHENTICATION : NO USE POP3 SERVER ADDRESS :

USER ID :

PASSWORD :

8ADVANCED MENU SET

Main Menu	[MENU] button
	[FUNC.] button
<MAIN MENU>
1.INITIAL SET	->
2.RECORD SET	->
3.GENERAL SET	->
4.SCREEN SET	->
5.POWER LOSS/USED TIME	->
6.INITIALIZATION LOG	->
7.COPY MENU SETTINGS	->
8.ADVANCED MENU SET	->
MOVE:JOG SELECT:SHUTTLE

[EXIT/OSD] button Shuttle dial

Configuration

The following settings can be made with <ADVANCED MENU SET>.

<ADVANCED MENU SET>
1.ROI SET	->
2.ALARM NOTICE SET	->
3.CAMERA CONTROL SET	->
4.PPP SET	->
5.TIME ZONE/NTP SET	->

Jog dial

3.CAMERA CONTROL SET (JP.145) Set camera control when

cameras with remote		<CAMERA CONTROL SET>
operation capability are	CH PROTOCOL		ADD	CH PROTOCOL		ADD
connected.	01	SANYO COAX	000	09	OFF	---
	02	BBV COAX	---	10	OFF	---
	03	PELCO COAX	---	11	OFF	---
	04	2ND RS-485/422	001	12	OFF	---
	05	OFF	---	13	OFF	---
	06	OFF	---	14	OFF	---
	07	OFF	---	15	OFF	---
	08	OFF	---	16	BBV COAX	---
		2ND RS485/422 PROTOCOL : OFF

SETTINGS

MOVE:JOG SELECT:SHUTTLE

4. PPP SET (JP.147)

Displays the PPP settings.

This cannot be set from

the digital video recorder.

Set this on a PC

		<PPP SET>
DIAL UP		: OFF
	DIAL UP SET	->

1. ROI SET (JP.139)

Set the Region of Interest

(ROI) to enable recording,

at different picture quality,

only of areas preset on the

monitor or areas where

motion is detected. Areas

where intruders are

detected, for example, can

		<ROI SET>
CH-01		QUALITY	ACTIVE ROI
STATIC AREA 1	:	OFF	OFF
STATIC AREA 2	:	OFF	OFF
STATIC AREA 3	:	OFF	OFF

EFFECTIVE REC MODE : NORMAL REC

connected to the network.

DIAL IN	: OFF
DIAL IN SET	->
CIRCUIT TYPE	: DTMF
MODEM INI. COMMAND	:
BAUD RATE	: 115200 bps
DATA SIZE	: 8 bits
PARITY	: NONE
STOP BIT	: 1

be recorded at higher

picture quality.

AREA/SENSITIVITY SET ---->

5.TIME ZONE/NTP SET (JP.149) Use the Internet or an NTP

server on a LAN to		<TIME ZONE SET>
synchronize the time.	TIME ZONE
		GMT Dublin, Lisbon, London

2.ALARM NOTICE SET (JP.144) Receive notification by e-

mail when an alarm event or device malfunction occurs.

This cannot be set from the digital video recorder. Set this on a PC connected to the network.

<NTP SET>
SYNC. WITH NTP SERVER : OFF
NTP SERVER ADDRESS	:	0. 0. 0. 0
TIME TO SYNCHRONIZE	:	01:00

138 English