Sanyo DSR-5009P instruction manual Pre-alarm recording is disabled, Pre-alarm recording is enabled

2RECORD SET

5 Turn the jog dial to select “ON” and then turn the shuttle dial clockwise.

The cursor moves to “REC RATE”.

		<ALARM REC MODE SET>
	ALARM RECORDING			: ENABLED
	PICTURE QUALITY			: ENHANCED
		PICTURE QUALITY SET		->
	AUDIO RECORDING			: OFF
	ALARM INTERLEAVE			: ONLY
		REC RATE: 12.5FPS,	DURATION: 20SEC
	PRE-ALARM RECORDING			: ON
		REC RATE: 12.5FPS,	DURATION: 5SEC
	ALARM TRIGGER			: ALARM
		MOTION SENSOR		->
[Settings] (‹ indicates default setting)
Setting		Description
‹OFF	Pre-alarm recording is disabled.
ON	Pre-alarm recording is enabled.

6 Turn the shuttle dial clockwise.

“12.5” flashes.

(Default setting: 12.5FPS)

<ALARM REC MODE		SET>
ALARM RECORDING		: ENABLED
PICTURE QUALITY		: ENHANCED
PICTURE QUALITY SET		->
AUDIO RECORDING		: OFF
ALARM INTERLEAVE		: ONLY
REC RATE: 12.5FPS,	DURATION: 20SEC
PRE-ALARM RECORDING		: ON
REC RATE: 12.5FPS,	DURATION: 5SEC
ALARM TRIGGER		: ALARM
MOTION SENSOR		->

7 Turn the jog dial to select the “REC RATE” setting and then turn the shuttle dial clockwise.

	<ALARM REC MODE		SET>
	ALARM RECORDING		: ENABLED
	PICTURE QUALITY		: ENHANCED
	PICTURE QUALITY SET		->
	AUDIO RECORDING		: OFF
	ALARM INTERLEAVE		: ONLY
	REC RATE: 12.5FPS,	DURATION: 20SEC
	PRE-ALARM RECORDING		: ON
	REC RATE: 12.5FPS,	DURATION: 5SEC
	ALARM TRIGGER		: ALARM
	MOTION SENSOR		->
[Settings] (‹ indicates default setting)
Setting	Description
100, 50, 25, 16.67,
‹12.5, 8.333, 6.25, 5,	Recording is performed at the
4.167, 3.571, 3.125,
2.778, 2.5, 2.273, 1.923,	selected recording rate (unit: FPS).
1.667, 1.471, 1.316, 1.19,
1.087, 1

z100 FPS cannot be selected when mirroring is set (JP.117).

zWhen only one camera is connected, recording is performed at 25 FPS even if 50 or 100 FPS are set.

zWhen four cameras are connected and 100 FPS is set, recording is performed at the recording rate close to the set rate (100 FPS) divided by the number of cameras. (Example: When 8 cameras are connected and the recording rate setting is 100 FPS, the actual recording rate is 12.5 FPS)

8 Turn the jog dial to select the “DURATION” setting and then turn the shuttle dial clockwise.

The cursor moves to “ALARM TRIGGER”.

		<ALARM REC MODE SET>
		ALARM RECORDING		: ENABLED
		PICTURE QUALITY		: ENHANCED
		PICTURE QUALITY SET		->
		AUDIO RECORDING		: OFF
		ALARM INTERLEAVE		: ONLY
		REC RATE: 12.5FPS,	DURATION: 20SEC
		PRE-ALARM RECORDING		: ON
		REC RATE: 12.5FPS,	DURATION: 5SEC
		ALARM TRIGGER		: ALARM
		MOTION SENSOR		->
[Settings] (‹ indicates default setting)
Setting		Description
‹5SEC, 10SEC, 20SEC,
40SEC, 1MIN, 2MIN, 3MIN,	Records for the set duration.
4MIN, 5MIN, 10MIN, 15MIN

English 97