Sanyo DSR-5009P instruction manual 189, Display SET, Buzzer SET

4GENERAL SET

GENERAL SET

1.DISPLAY SET

2.BUZZER SET

3.SECURITY LOCK SET

4.USER ID SET

5.RS-232C/RS-485 SET

6.HDD SET

7.NETWORK SET

8.NETWORK CONTROL SET

1. DISPLAY SET

Set conditions for the display of data on the unit’s monitor by selecting “ON” or “OFF” for each item.

1 Click the button on the operation panel.

The “MAIN MENU” is displayed.

2 Click “3. GENERAL SET”.

The “GENERAL SET” screen is displayed.

3 Click “1. DISPLAY SET”.

The “DISPLAY SET” screen is displayed.

DISPLAY SET

(1)	DATE	:	ON
(2)	TIME	:	ON
(3)	QUALITY	:	ON
(4)	AUDIO	:	ON

(5) ALARM COUNT : ON

(6)	ALARM TYPE	:	ON
(7)	TITLE	:	ON

5SAVE

4 Select “ON” or “OFF” for each display item.

	Item	Default	Description
		setting
(1)	DATE	ON	Displays the current date or
			recording date.
(2)	TIME	ON	Displays the current time or
			recording time.
(3)	QUALITY	ON	Displays the picture quality for
			recording or playback.
(4)	AUDIO	ON	Displays the audio status during
			recording or playback.
(5)	ALARM	ON	Displays the number of recorded
	COUNT		alarms.
			Displays the alarm recording type.
	ALARM		z For alarm recording:
(6)		ON	“ALARM” is displayed.
	TYPE
			z For pre-alarm recording:
			“PRE” is displayed.
(7)	TITLE	ON	Displays the camera title.

5 Click [SAVE].

The setting is saved.

zThese settings apply to information displayed on the monitor connected to the unit, not to information displayed on the PC monitor.

2. BUZZER SET

Use the following procedure to set a warning buzzer that sounds when an alarm occurs or when the hard disk space reaches remaining-space warning level.

1 Click the button on the operation panel.

The “MAIN MENU” is displayed.

2 Click “3. GENERAL SET”.

The “GENERAL SET” screen is displayed.

3 Click “2. BUZZER SET”.

The “BUZZER SET” screen is displayed.

(1)	BUZZER SET
(2)
	ALARM	: OFF
(3)	DISK FULL	: ON
	DISK ERROR	: ON
(4)	LOCK WARNING : ON
(5)	KEY IN	: OFF
(6)	NON REC	: OFF
5	SAVE

4 Select “ON” or “OFF” for each display item.

	Item	Default	Description
		setting
(1)	ALARM	OFF	Sounds a buzzer when an alarm is
			detected.
			Sounds a buzzer when the amount
	DISK		of data stored in each of the hard
(2)		ON	disk recording areas reaches the
	FULL
			remaining-space warning level
			(JP.182).
(3)	DISK	ON	Sounds a buzzer when a hard-disk
	ERROR		error occurs.
			Sounds a buzzer when a restricted
			operation button is pressed during
(4)	LOCK	ON	security lock.
	WARNING		Specifically, the buzzer sounds
			twice with an interval of
			approximately 0.5 seconds.
(5)	KEY IN	OFF	Buzzer emits a key-operation sound
			each time a button is pressed.
(6)	NON	OFF	Sounds a buzzer when recording is
	REC		stopped.

English 189