Sanyo DSR-5009P instruction manual 161, Finishing dome camera operation

3OPERATION PANEL FUNCTIONS AND RESTRICTIONS

4.Menu set

Sets the camera internal menu item setting values.

5.[MENU]

Displays camera internal menu screen.

6.Control speed

Adjusts the operation speed for Pan and Tilt.

Sets a level between 1 and 7. Higher values correspond to faster operation speed.

7.[ZOOM]

Activates zoom mode. (“ZOOM” turns green) Use -/+ to zoom.

8.[FOCUS]

Activates focus adjust mode. (“FOCUS” turns green) Adjust focus with -/+.

9.[IRIS]

Activates IRIS adjust mode. (“IRIS” turns green) Adjust IRIS with -/+.

10.-/+

Use when zooming, adjusting focus, and adjusting IRIS.

11.[AF]

Use auto-focus.

12.[SEQ]

Starts automatic camera selection. Press a different operation button to switch to that operation.

13.[PAN]

Starts automatic panning. Press a different operation button to switch to that operation.

14.[TOUR]

Starts the TOUR saved on the camera. Press a different operation button to switch to that operation.

15.Preset access

Move camera into position set with preset number.

For preset numbers after 9, select from the drop-down list and click [GO].

16.Preset register

Select a preset number from the drop-down list and click Menu set to register the current camera position.

17.Record (LV3, LV4)

This button starts normal recording.

18.Record stop (LV3, LV4)

This button stops normal recording.

19.Timer (LV3, LV4)

This button activates timer standby mode when clicked while recording is stopped. If clicked in Timer Standby mode, it deactivates this mode.

20.Disconnect (LV1, 2, 3, 4)

This button disconnects the PC from the network and switches control rights to the unit.

zWhen pan/tilt is pressed during automatic panning, automatic camera selection or TOUR, manual pan/tilt mode is entered and all automatic modes are cancelled.

Finishing dome camera operation

3 Click [CAMERA CONTROL].

Camera operation panel changes to Normal operation panel.

English 161