Setting overwrite permission | Sanyo DSR-5009P manual

2RECORD SET

7 Turn the shuttle dial clockwise.

After the hard disk is initialized, the <RECORD SET> screen appears and the new recording capacity setting is applied.

HDD INITIALIZING !

8 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

Setting overwrite permission

When “OVERWRITE” is set to “OFF” for recording conditions and the recording areas become full, recording is automatically stopped. In this case, overwrite permission can be used to overwrite previous recordings.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “2.RECORD SET” and then turn the shuttle dial clockwise.

The <RECORD SET> screen is displayed.

3 Turn the jog dial to select “2.RECORDING AREA SET” and then turn the shuttle dial clockwise.

The <RECORDING AREA SET> screen is displayed.

<RECORDING AREA SET>
TOTAL CAPACITY	:	1200GB
INTERNAL HDD	:	500GB
EXTERNAL HDD	:	700GB

RECORDING AREA	:	80	%
AREA FULL RESET	->
ARCHIVE AREA	:	20	%
AREA FULL RESET	->

CAUTION: WHEN THE AREA SETTING IS CHANGED,

THE WHOLE AREA WILL BE INITIALIZED !

4 Turn the jog dial to select “AREA FULL RESET” under “RECORDING AREA” and then turn the shuttle dial clockwise.

The <WARNING> screen is displayed.

To perform “AREA FULL RESET” for the archive area, select “AREA FULL RESET” under “ARCHIVE AREA”.

<WARNING>

AREA FULL RESET

ARCHIVE AREA

ARE YOU SURE ?

NO

MOVE:JOG SELECT:SHUTTLE

5 Turn the jog dial to select “YES” and then turn the shuttle dial clockwise.

Recordings can now be made to the recording area.

<RECORDING AREA SET>
TOTAL CAPACITY	:	1200GB
INTERNAL HDD	:	500GB
EXTERNAL HDD	:	700GB
RECORDING AREA	:	80%
AREA FULL RESET		->
ARCHIVE AREA	:	20%
AREA FULL RESET		->

CAUTION : WHEN THE AREA SETTING IS CHANGED,

THE WHOLE AREA WILL BE INITIALIZED !

6 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

English

79

Image 80

Sanyo DSR-5009P instruction manual Setting overwrite permission, Recordings can now be made to the recording area

Contents

Digital Video Recorder with Multiplexer Function About this manual Precaution ServiceLocation Avoiding Electrical Shock and Fire Main features AccessoriesSymbols used in this manual Introduction Contents Contents Settings Network Control Contents Network Operation Network Settings Contents Other Before USE HDD and cooling fan are consumable componentsImportant recordings Protection of the HDD Backup battery Before USE Front panel Names and Functions of PartsDSR-5016P Names and Functions of Parts DSR-5009P Rear panel Sensor Alarm OUT terminals ALL Reset buttonAC power socket AC Power cord holder Installation and Connections Connecting the RS-232C terminalBasic connections DSR-5016P RS-232C Pin locations Installation and Connections Connecting RS-485 control terminals Connecting to a 2ND RS485/422 terminal RS-485 termination switch settingsConnect as above Operation Connecting a LAN terminal Connecting an amplifierConnecting alarm input terminals LAN connection Connecting Sensor Alarm OUT terminals Connecting control terminalsConnecting the power cord Operation Operation display 01-01-05 000000 REC Repeat EN a AlarmPreparing for USE Preparing for USE Changing the display position of the operation display areaChanging the language Press the EXIT/OSD button Turn the shuttle dial clockwise Setting the timeExample Setting 830 on 26 October Hard disk archive area Hard disk recording areasRecording area Archive area Monitoring Video from a Camera Viewing on a full screenPress the No Camera Select button Press the Zoom button during monitoring of camera video Monitoring Video from a Camera Viewing on quad screensPress the Zoom button to return to normal magnification Press the Quad button Viewing on multi 9 or multi 16 screens Enlarging videoPress the Multi button Press the Plus button during multi 9 screen display Setting automatic full screen selection Setting automatic quad-screen selectionAutomatic camera selection Press the Sequence button Viewing on monitor Press the MON2 buttonViewing on a quad screen Viewing on a full screen Viewing on multi 9 or multi 16 screens Monitor Main monitor Monitor Displaying alarm video in full screen formatMON2 indicator turns off Timer recording Set timer recording. JP.87 Press the Timer buttonRecording Normal recording Recording Alarm recordingPre-alarm recording Play Playing video on a full screenFast-forward and fast-rewind playback Changing the playback speed Press the Zoom button during playback PlayMagnifying the playback video Playing video on multiple screens Viewing still imagesFrame advance forward/reverse To view video from other cameras Video on full, quad, multi 9 or multiScreens Press the Multi button during Playback Searching for Recorded Video Motion Detection Search JP.45 „ To confirm normal recording Alarm log searchSearching for Recorded Video Alarm search Total AlarmsDATE/TIME Search Entering an alarm number to search for an alarm video „ To view pre-alarm videoSearch screen, press the FUNC. button and select Search Search input field flashes Entering a camera number to search for an alarm video Press the FUNC. buttonCursor moves to the list Channel input field flashes To view alarm video before or after the current playback Alarm thumbnail searchPress the Alarm button during playback Search screen, press the FUNC. button Search by entering an alarm numberTurn the jog dial to select the video for playback Time/date search Search by entering a camera numberRecording TOP Recording END Specify the date and time Turn the shuttle dial clockwise while Channel is selectedPress the Camera Select 5 button Searching within the archive area DateStart Total Entering an archive number to search for an alarm video Motion detection searchCursor moves to Search Motion Detection Search screen is displayed Setting the motion sensor for searching StartEND Motion Sensor ‹OFF Turn the jog dial to select Preview „ If not FOUND! is displayedViewing video detected by the motion sensor Set the motion sensor again Saving Copying Recorded Video Copying video to the hard disk’s archive area JP.50Copying video to a CompactFlash card or Microdrive JP.51 Copying video to a CD-R/RW or DVD+R/+RW JP.54 Saving Copying Recorded Video Copying video to the hard disk’s archive areaPress the Copy button Set the time „ To cancel copying Copying to a CompactFlash card or MicrodriveInsert a CompactFlash card Example Copying 20 images Turn the shuttle dial clockwise while Pictures is flashing Maximum Viewing images copied to a CompactFlash card on a PC Available space and write capacity are checked Example Copying the maximum video to the copy destination Copying to a CD-R/RW or DVD+R/ +RWConnect a recordable CD or DVD drive and insert a disk Number of images flashes Cursor appears on Copy Start Flash Disc Writer Formatting a CompactFlash card, CD-RW or‹COMPACT Viewing images on a PC Dcim Viewer YYMMDD99 Menu Configuration and Operations Basic menu operationsTurn the jog dial to select an item Turn the jog dial to select a function Menu Configuration and Operations Resetting menu itemsMovement and confirmation in sub-menus and setting screens Displayed settings are restored to their default values Sub-menu configuration Power LOSS/USED Time JP.133 Displays the date and timeCopy Menu Settings JP.135 Stores and loads menu Advanced Menu SET JP.138 Sets the ROI setting, alarm Configuration Initial SET Setting the language Setting the summer timeTurn the jog dial to select Mode under Summer Time SET Initial SET External clock setting Set the date and timeSummer time begins Summer time ends Example Set to Flashes Default setting isDetecting connected cameras Quad Setting camera titlesExample Setting the title HALL-1STFL for Camera No Setting holidays Example Setting 26 October as a holidayHoliday SET screen is displayed Default setting is Turn the jog dial to select H Setting time periods Set the day and month for item „ Setting automatic selection of camera video „ Masking camera video using a gray pattern„ Alarm recording using motion sensors Operations during the specified time periods Timer period settings Example 1 Setting periods using Time Period aSet the time for T-1 Set the time for T-2 Cursor moves to Time Period a Timer period operations settingsTime Period a flashes Record SET Normal recording easy setup Setting based on recording daysAlarm Operation SET JP.102 Makes settings for Record SET Set the time for timer recording Example Timer recording from 8 AM to 8 PM Example on Setting based on recording rateTurn the shuttle dial counter-clockwise REC Rate Base 25 FPS/CAM Displaying the recording areas Recording Area SET screen is displayedDisplays the total capacity of the hard disk Hard disk capacity „ Default hard disk settings Example Setting the recording area to 50%Changing recording areas Turn the jog dial to select YES Setting overwrite permission Recordings can now be made to the recording area ‹ON Setting recording conditionsOFF 01-01-05 000000 REC 5% EN a Alarm Auto Alarm‹MANUAL Copy Copy Setting auto deleting Setting normal recording „ Setting the picture quality for each camera Default setting OFFFPS flashes Allowable Setting program recording Example P-1Program Select Individual Camera Rate Program REC SET screen is displayed Flashes for ProgramCursor moves to 01 under Select Individual Camera Rate FPS Recording rate is not set Timer settings Timer setting items Setting the Start and Stop time Indicating the hour from Start flashesOFF flashes for SET Cursor appears in the bottom line Use the same procedure to set other items „ To change a setting itemTo cancel all set timer reservations EXT Make settings in the Week and Start columns Timer recordings spanning more than 24 hoursSAT in the Week column flashes Line Timer recording using an external timer OFF 5FPS Setting timer recording Cursor moves to line Setting alarm recording To set alarm recording Cursor moves to Alarm Interleave Only flashes ‹ONLY Number of alarms Alarm display To set pre-alarm recordingCursor moves to PRE-ALARM Recording Pre-alarm recording is disabled Pre-alarm recording is enabledFlashes Default setting 12.5FPS Cursor moves to Alarm Trigger Setting alarm triggers Number of alarmsUse this setting to indicate how alarms are to be detected PRE display Setting the motion sensors Level Use the same procedure to set other sensor positions 100Turn the jog dial to select a or B Turn the shuttle dial clockwise twice Setting time periods Setting sensitivity levelsSetting sensor modes 101 Setting alarm operation and display 102„ To stop motion sensor recording To B 103 104 Canceling an alarm 105 RS-232C/RS-485 SET JP.115 Makes settings when General SET106 HDD SET JP.117 General SET Setting data display107 On flashes for Video Loss Setting display for video loss108 Setting the buzzer 109 Setting the security lock 110 111 ‹NORMALChange LV4 Setting user ID 112„ User level and privileges Registering a user Enter a password Turning on the key lock, password lock and network lock113 Enter a user ID During password lock, press Enter the user ID and password114 Confirm the lock status Setting RS-232C and RS-485 115RS-232C/RS-485 SET screen is displayed RS-485 flashes 116 Setting mirroring 117Hard disk initialization and mirroring Initializing the hard disk 118 ‹MASTER Expanding Replacing and initializing the hard disk Switching playback disks119 Network settings Making network settingsSwitch 120 121 Set IP AddressSet Subnet Mask Set Gateway 122 Set Http Port Making network control settings 123 124 Setting user 125„ User levels and privileges LV1 LV2 LV3 LV4 126 Setting quad and multi 9/16 displayScreen SET Checking modified screen positions 127Screen SET 128 Screen SET screen is displayed1S flashes for Full Automatic selection is set to an interval of 5 seconds 129 MAIN/MON.2 Monitor SET screen is displayedFlash for Time Period Cursor moves to 1S for 01 and Main MON Setting masks ‹ 1S 30S Switching interval seconds130 Channel not displayed Use the same procedure to set other channels 131 Setting the color level Settings The default setting is132 Color Level SET screen is displayed Select Used Time and then turn the shuttle dial clockwise Power LOSS/USED Time133 Initialization LOG 134Area Action Copy Menu Settings Saving menu settingsCopy Menu Settings screen is displayed Jog dial 135 Copy Menu Settings Loading menu settingsCopy Menu Settings screen is displayed 136 Copying the recording area settings Use the following procedure to copy recording area settings137 Cursor appears on Save Menus to CF Advanced Menu SET 138 Setting ROI Setting the ROI139 Advanced Menu SET 140 Response sensitivity is disabled Response sensitivity is enabled. LowerSet Time LAG to OFF when Level is set English 141 Setting ROI areas 142No operation after the response-stop 1S 10S 143 Set the areas in frame 2 and frame 3 in the same wayCursor moves to the bottom right Cursor the orange † moves to the top left of frame Setting alarm notification 144 Camera control settings 145Sanyo COAX1 Sanyo Coax Sanyo RS485 BBV Coax Pelco Coax Sanyo COAX2 146 Making PPP settings 147Click the buttons to operate the camera Operating the camera with the digital video recorder 148 Time zone/NTP setting 149Time Zone SET / NTP SET screen is displayed GMT Dublin, Lisbon, London flashes 150 Set NTP Server AddressSet Time to Synchronize ExamplePage Manual for Remote Operation by Network Connection Digital video recorder network settings Getting Prepared153 Operations possible with PC control 154 Getting PreparedClick the Security tab Click Custom Level 155 Click Network ConnectionsClick Properties Click OK Controlling from a PC Network Control156 Disconnecting Messages displayed when connected157 Select a language and click OK „ When control rights are switched to the unit Display on the PC „ When disconnected from the network„ When network settings are changed 158 159 Operation panel Camera operation panel 160Operation Panel Functions and Restrictions 161 Finishing dome camera operation Recording Images 162Click the button on the operation panel Stopping normal recording Various ways of displaying live images Watching Images163 Watching Images Performing operations in play mode164 Adjusting the image and audio 165 Normal Recording Mode Alarm Recording Mode166 Screen display items 167 Downloading live images to a PC 168 When saving is completed, click OK on the pop-up window„ To cancel a save operation Search for video using the search mode screen 169Basic operation Search menu Searching for Recorded Video Alarm LOG Search 170 171 Searching for Recorded Video Alarm SearchAlarm Thumbnail Search 172 Searching for Recorded Video TIME/DATE SearchArchive Area Search Click 4. TIME/DATE Search on the Search screen 173 Searching for Recorded Video Motion Detection SearchClick 6. Motion Detection Search on the Search screen Specify the search area from the Search from pull-down menu 174 Copying to the archive areaClick Button on the operation Panel Enter the number of images for HOW Many 175 Downloading to a PC 176 Displays the download results Settings 177Making menu selections Click a menu on the Main Menu 178 Menu structure Summer Time SET/EXT. Clock SET 179Clock SET 180 Holiday SETClick Save Click 3. Holiday SET 181 Recording Area SETClick 2. Record SET Click 1. Recording Area SET 182 Recording Conditions SET Record SET Normal REC Mode SET 183 184 Program REC SETSet REC Program Group to the desired program group Click 4. Program REC SET 185 Record SET Timer SETClick 5. Timer SET Record SET Alarm REC Mode SET Click 6. Alarm REC Mode SETSet Alarm Recording to the desired recording mode Setting alarm recording Set Alarm Interleave to the desired recording pattern Set Duration to the desired alarm recording durationSet PRE-ALARM Recording to on or OFF 187 Set Duration to the desired pre- alarm recording duration Alarm or188 15MIN Buzzer SET 189Display SET To cancel the buzzer setting on the PC 190Security Lock SET Click 3. Security Lock SET Set user ID for User ID Set Password Set user level for LV Settings Description Level191 General SET User ID SET 192 RS-232C/RS-485 SETHDD SET Click 5. RS-232C/RS-485 SET Change the settings as required 193Network SET Click 7. Network SET 194 Network Control SETClick 8. Network Control SET Set Network Status to on or OFF 195 196 Sequence SET 197 Screen SET Mask SETClick 2. Mask SET Set the following functions as required 198 Power LOSS/USED TimeClick 5. Power LOSS/USED Time Click 6. Initialization LOG 199Initialization LOG Saving Menu Settings Loading Menu SettingsClick 7. Copy Menu Settings 200 Alarm Notice SET Click 1. Alarm Notice SETSet Alarm Notice to on 201 202 Camera Control SETPPP SET Click 2. Camera Control SET 203 NTP SET Setting is saved Click Renewal to manually update the time 204Click 4. Time ZONE/NTP SET Set Time Zone Installing DVR Viewer2 DVR VIEWER2205 Operating environment 206 DVR VIEWER2Opening and closing DVR Viewer2 Opening DVR Viewer2 207 Opening filesClick OpenO on the FileF menu Click Browse... to display the folder tree 208 Viewing imagesMain window Thumbnail window 209 TOPPrev Rplay 210 Printing images Interface Specifications RS-485 specificationsRS-232C specifications 211 212 Interface SpecificationsDVR/VCR command table Jpeg Specifications213 Specifications Dimensions 214Units mm 420 Specifications Table of recording rates and times 215 216 Recording rates that cannot be selected English Specifications Table of recording rate settings217 Specifications Table of pre-alarm recording times 218 Specifications Terminal board specifications 219 220 Menu Setting Sequence 221Record SET →P.71 Recording Area SET →P.77 Menu Setting Sequence Power LOSS/USED Time → P.133222 Network SET →P.120 Alarm Notice SET →P.144 223Initialization LOG →P.134 Dial UP SET →P.148 224 SymbolsIndex 112, 125 225Index L8HBD/XE, L8HBF/XE 0405TR-SY