Sanyo DSR-5009P 142, Setting ROI areas, No operation after the response-stop, 1S 10S

8ADVANCED MENU SET

18 Turn the shuttle dial clockwise.

“OFF” flashes.

2

1

3

CH-01 T-1 LEVEL: OFF TIME LAG: OFF

19 Turn the jog dial to select the time lag and then turn the shuttle dial clockwise.

		2
		1
		3
		CH-01 T-1 LEVEL: OFF TIME LAG: OFF
[Settings] (‹ indicates default setting)
Setting		Description
‹OFF	No operation after the response-stop
1S - 10S	Time lag after the response-stop (seconds)

20 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

Setting ROI areas

Use the following procedure to select the position of the areas for ROI.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “8.ADVANCED MENU SET” and then turn the shuttle dial clockwise.

The <ADVANCED MENU SET> screen is displayed.

3 Turn the jog dial to select “1.ROI SET” and then turn the shuttle dial clockwise.

The <ROI SET> screen is displayed.

		<ROI SET>
CH-01		QUALITY	ACTIVE ROI
STATIC AREA 1	:	ON	OFF
STATIC AREA 2	:	ON	OFF
STATIC AREA 3	:	ON	OFF

EFFECTIVE REC MODE : NORMAL REC

AREA/SENSITIVITY SET ---->

4 Turn the jog dial to select “AREA/ SENSITIVITY SET” and then turn the shuttle dial clockwise.

The <AREA/SENSITIVITY SET> screen is displayed. The normal camera image is displayed overlapping.

The frame for the number is not displayed if “QUALITY” is set to “OFF” in the previous screen.

2

1

3

CH-01 T-1 LEVEL: OFF TIME LAG: OFF

SETTINGS

142 English