Brother PT-2110, PT-2100 manual zTape Cuttingz, Label Printing, Setting, Description, Example

54

LABEL PRINTING

zTape Cuttingz

Setting

Description

Example

Large

Automatically cuts the tape after each label is

ABC

ABC

printed. The labels have a 0.94" (24 mm)

Margin

margin on the left and right ends.

0.94" 0.94"

(24 mm) (24 mm)

• When printing labels one at a time:

0.92" (23 mm)

Automatically cuts a piece of blank tape

before printing the label, and then cuts the

ABC

ABC

Small

tape after the label is printed.

0.16"

0.16"

• When printing several labels continuously:

(4 mm)

(4 mm)

Margin

Automatically cuts a piece of blank tape

before printing the first label, and then cuts

the tape after each label is printed.

• The labels have a 0.16" (4 mm) margin on

the left and right ends.

• When printing labels one at a time:

0.92" (23 mm)

Automatically cuts a piece of blank tape

before printing the label, and then does not

ABC

ABC

cut the tape after the label is printed.

0.16"

0.16"

• When printing several labels continuously:

(4 mm)

(4 mm)

Chain

Automatically cuts a piece of blank tape

before printing the first label, and then cuts

the tape after each label is printed.

• The labels have a 0.16" (4 mm) margin on

the left and right ends.

• The tape is not fed and cut after the last

label is printed.

• Use this setting to print a strip of labels with

no cuts in between.

No Cut

ABC ABC

• Pressing the

while holding down

key will feed and cut the last label

1.06"

0.31"

printed.

(27 mm)

(8 mm)

• When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, set “No Cut” and refer to “Feeding Tape” on page 22 to apply the appropriate setting.

•The tape is not cut after the last label is printed when “Chain” or “No Cut” is set. Hold down

the key and press the key, and select “Feed & Out” (refer to “Feeding Tape” on page 22 ) to feed and cut tape automatically, or cut the tape manually if you are using Fabric Iron-on Tapes or Extra Strength Adhesive Tapes.

•When using the Auto-Format function, the label is cut with a margin on the left and right ends regardless of the current Tape Cutting Option Setting except as “No Cut” is set.

Tape Cutting Options