GETTING STARTED
Feeding Tape
Feed & Cut
This function will advance the tape approximately 0.92" (23 mm) and then cut the tape, resulting in a blank label. This action maybe needed when installing a new tape cassette to remove a bend in the tape and or ensure correct feeding of the tape.
1
Hold down the 
key and press the 
key. "Feed & Cut?" will appear on the LCD display.
2
Using the 
or 
select the "Feed & Cut" option and then press either 
or 
. The message "Feeding Tape... Please Wait" appears while the tape is fed, and then the tape is cut.
To exit or cancel this function press 
.
Feed Only
This function will advance the tape approximately 0.92" (23 mm) resulting in a blank label sticking out the tape cassette. This action is recommended when using Fabric and Extra Strength Adhesive tapes, which should be cut using scissors.
1
Hold down the 
key and press the 
key. "Feed & Cut?" will appear on the LCD display.
2
Using the 
or 
select the "Feed Only" option and then press either 
or 
. The message "Feeding Tape... Please Wait" appears while the tape is fed.
To exit or cancel this function press 
.
22 |
Feeding Tape
