Brother PT-2100, PT-2110 manual Tape Cutter, AC adapter, z INTRODUCTION, Battery, P-touch, Memory

CAUTION

Tape Cutter

Follow these guidelines to avoid personal injury and damage of the P-touch.

Do not touch the blade of the cutter unit.

Do not open the tape compartment cover when operating the cutter unit. Do not apply excessive pressure to the cutter unit.

AC adapter

z INTRODUCTION

Be sure to disconnect the AC adapter from the power outlet and the P-touch when not using the P-touch for any extended period of time.

Battery

Always hold the plug when disconnecting the power cord from the power outlet.

Follow these guidelines to avoid liquid leakage, heat, rupture of the battery.

Do not use old and new batteries together.

Do not mix alkaline batteries with other type batteries.

P-touch

Do not set the positive and negative end in the wrong position.

Remove the batteries if you do not intend to use the P-touch for an extended period of time.

1

Follow these guidelines to avoid personal injury and damage of the P-touch.

Place the P-touch on a flat, stable	Do not place any heavy objects on top
surface such as a desk.	of the P-touch. Do not press on the
	LCD display.

Tape

Depending on the location, material, and environmental conditions, the label may unpeel or become irremovable, the color of the label may change or be transferred to other objects.

Before applying the label, check the environmental condition and the material.

Memory

Any data stored in memory will be lost due to failure or repair of the P-touch, or if the battery expires.

When power is disconnected for more than two minutes, all text and format settings will be cleared. Any text files stored in the memory will also be cleared.

2

3

4

5

6

7

8

9

Safety Precautions

9