LABEL PRINTING
• Press the 
key to return to the previous step.
• Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to “Tape Cutting Options” on page 53 to change this setting.
•The figures shown on the screen during printing indicate the “count / number of copies”.
•
•The
•Only one
•Any symbols or other
•An
•Letters and numbers increase as shown below:
0 | Î 1 | ...9 | Î 0 | Î ... |
A | Î B | ...Z | Î A | Î ... |
aÎ b ...z Î a Î ...
A0 Î A1 ...A9 Î B0 Î ...
Spaces (shown as underlines “_” in the example below) can be used to adjust the spacing between characters or to control the number of digits that are printed.
_9 | Î 10 | ...99 Î 00 Î ... |
_Z | Î AA | ...ZZ Î AA Î ... |
1_9 | Î 2_0 | ...9_9Î 0_0 Î ... |
Mirror Printing
Using the mirror printing function you can create labels with the text printed in reverse so that they can be read from the opposite side when attached to glass or other transparent material.
1Make sure that the appropriate tape cassette is inserted and ready for printing.
2Hold down the 
key and press the 
key to display the print options screen, and then select “Mirror” using the 
or 
key.
3
Press the 
or 
key.
The message “Mirror Print?” is displayed
4
Press the 
or 
key.
The message shown on the right is displayed while the label is being printed.
52 |
Printing a Label
