Brother PT-2100, PT-2110 manual Adjusting the Label Length, Attaching Labels

Adjusting the Label Length

You can adjust the length of the printed label in levels of -5 to +5.

1Press the key to display the setup menu, select "Adjust Length" using the or key, and then press the or key.

2Select "Adjust Length" by using the or key, and then set the value by using the or key.

3Press the or key to apply the setting.

•	Press the	key to return to the previous step.
•	Press the	key to set the value to default setting.

• Approximately 1% of the total label length will be adjusted by 1 level.

Attaching Labels

1If necessary, trim the printed label to the desired shape and length using scissors, etc.

2Peel the backing from the label.

The backing of some types of tapes may be pre-cut to make it easier to peel the backing.

3Position the label and then press firmly from top to bottom with your finger to attach the label.

• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel off easily from these surfaces.

•Be sure to read the instructions provided with Fabric Iron-On Tapes, Extra Strength Adhesive Tapes or other special tapes and observe all precautions noted in the instructions.

Adjusting the Label Length

z LABEL PRINTING

1

2

3

4

5

6

7

8

9

55