Brother PT-2100, PT-2110 Error Messages, Cause/Remedy, The installed batteries are getting weak

Error Messages

When an error message appears on the display, follow the directions provided below.

Press any key to clear the error message.

Message	Cause/Remedy
	The installed batteries are getting weak.

The installed batteries are about to run out of power. Replace with new batteries or connect the AC adapter before continuing.

An incompatible AC adapter is connected. Use only the AC adapter (Brother AD-24) designed exclusively for your P-touch labeler.

The tape cutter is closed when you try to print or feed tape with the cover closed and the tape cassette inserted. Turn the P-touch labeler off and then on again before continuing. When tape is tangled in the cutter, remove the tape.

There is no text, symbols or bar code data entered when you try to print or preview a label. Enter data before continuing.

There is no tape cassette installed when you try to print or preview a label, or feed tape. Install a tape cassette before continuing.

The tape cassette is changed while printing, etc. Make sure the correct tape cassette is inserted before printing.

There are already five lines of text when you press the key. Limit the number of lines to five.

There are more than three lines of text when you press the

or key while using 1/2" (12 mm) tape. Limit the number of lines to three, or replace with tape cassette of larger tape width.

z TROUBLESHOOTING

1

2

3

4

5

6

7

8

9

Error Messages

65