Setting Label Attributes
Using the 
key, you can create a label with a frame around the text and specify the label length and tab length. (Cut Options which may be needed when printing a label can also be set by using the 
key. Refer to “Tape Cutting Options” on page 53 and 54.)
1Press the 
key.
The current settings are displayed.
z EDITING A LABEL
2Select an attribute using the 
or 
keys, and then set a value for that attribute using the 
or 
keys.
• When setting the tab length, hold down the 
or 
keys to change the value faster.
•When setting the label length, refer to “Adjusting the Label Length” on page 55
3Press the 
or 
key to apply the settings.
New settings are NOT applied if you do not press the 
or 
key.
• | Press the | key to return to the previous step. |
• | Press the | key to set the selected attribute to the default value. |
• Refer to the Setting Options table for a list of all available settings.
1
2
3
4
5
6
7
8
9
Setting Label Attributes
35 |
