| Message | Cause/Remedy | |
|
|
| A 1/4" (6 mm) tape cassette is not installed when an Auto- |
|
|
| |
|
|
| Format for 1/4" (6 mm) tape is selected. Install a 1/4" (6 mm) |
|
|
| tape cassette. |
|
|
|
|
|
|
| A 9/64" (3.5mm) tape cassette is not installed when an Auto- |
|
|
| |
|
|
| Format for 9/64" (3.5mm) tape is selected. Install an 9/64" |
|
|
| (3.5mm) tape cassette. |
|
|
|
|
|
|
|
|
|
|
| The maximum number of characters for the selected layout |
|
|
| |
|
|
| have already been entered. Edit the text to use fewer |
|
|
| characters or use a different layout. |
|
|
| The value entered for setting the tape length, tab length, |
|
|
| |
|
|
| multiple copies, or numbering function is invalid. Enter a valid |
|
|
| value for the setting. |
|
|
|
|
|
|
| The tape length set using the tape length setting is shorter than |
|
|
| |
|
|
| the total length of the left and right margins applied for the |
|
|
| "Large Margin" cutting option. Select a different cutting option. |
|
|
| The length of the label to be printed using the text entered is |
|
|
| |
|
|
| longer than the length setting. Edit the text to fit within the set |
|
|
| length or change the length setting. |
|
|
| The text size is too large. Select a different size option. |
|
|
| |
|
|
|
|
|
|
| The number of digits entered in the bar code data does not |
|
|
| |
|
|
| match the number of digits set in the bar code parameters. |
|
|
| Enter the correct number of digits. |
|
|
| The bar code data entered does not have the required start/ |
|
|
| |
|
|
| stop code (A, B, C, or D required at the beginning and end of |
|
|
| the bar code data for the CODABAR protocol). Enter the bar |
|
|
| code data correctly. |
|
|
| |
|
|
| There are already 5 bar codes entered in the text data when |
|
|
| you try to enter a new bar code. You can only use up to five |
|
|
| bar codes in each label. |
|
|
|
|
z TROUBLESHOOTING
1
2
3
4
5
6
7
8
9
Error Messages
67 |
