EDITING A LABEL
Inserting Text
•To insert additional text into an existing line of text, move the cursor to the character to the right of the position where you want to start inserting text and then enter the additional text. The new text is inserted to the left of the cursor.
Inserting a Tab
•To insert a tab space between the existing line of text, move the cursor where you wish to add a tab and press the 
key. A 
mark appears to indicate the position which the tab space will be entered.
• To change the length setting of the tab, refer to “Setting Label Attributes” on page 35.
• The tab space can also be entered by pressing the 
key to open the Setup menu and selecting "Tab" by using 
or 
keys, and then pressing the 
or 
key.
Deleting Text
Deleting one character at a time
•To delete a character from an existing line of text, move the cursor to the character to the right of the position you want to start deleting text and then press the 
key. The character to the left of the cursor is deleted each time the 
key is pressed.
If you hold down the 
key, the characters left to the cursor are deleted continuously.
Deleting all text at once
• Use the 
key to delete all text at once.
1
Press the 
key.
The Clear options are displayed.
2Using the 
or 
keys, select “Text Only” to delete all text while retaining the current format settings, or select “Text & Format” to delete all text and format settings.
Press the 
key to return to the text entry screen, without erasing (or clearing) text or format.
3 Press the | or | key. |
All text is deleted. All format settings are also deleted | ||
if Text & Format was selected. | ||
26 |
Entering and Editing Text
