Brother PT-2100 Problem, Possible Cause, Recommendation, The LCD messages, are displayed in a

Problem	Possible Cause	Recommendation
The LCD messages	Is the language set	Refer to “Setting Language
are displayed in a	properly?	and Unit” on page 24 and
foreign language.		select the desired language
		for the LCD messages.
The label is not	Is the tape cassette installed	When installing a cassette,
printed correctly.	correctly?	press firmly until it clicks into
		place.
	Is the print head clean?	If not, clean the print head
		using a cotton swab or
		optional print head cleaning
		cassette (TZ-CL4).
	Is Cut Option set to Chain or	When these options are set,
	No Cut?	the tape is not fed after
		printing the label. Check the
		Cut Option setting, or hold
		down the	key and press
		the	key to feed and cut
		the tape.
The ink ribbon is	Is the ink ribbon in the tape	If the ink ribbon is broken
separated from the	cassette loose, or did you	replace the tape cassette. If
ink roller.	pull on the label coming out	not, leave the tape uncut and
	of the tape exit slot?	remove the tape cassette,
		then wind the loose ink
		ribbon onto the spool as
		shown in the figure.
			Spool
			Ink ribbon

z TROUBLESHOOTING

1

2

3

4

5

6

7

8

9

What to do when...

63