Sanyo DSR-5009P instruction manual Cursor moves to Alarm Interleave, Only flashes

2RECORD SET

7 Turn the jog dial to select the “PICTURE QUALITY” setting and then turn the shuttle dial clockwise.

The cursor moves to “AUDIO RECORDING”.

		<ALARM REC MODE SET>
		ALARM RECORDING	: ENABLED
		PICTURE QUALITY	: ENHANCED
		PICTURE QUALITY SET	->
		AUDIO RECORDING	: OFF
		ALARM INTERLEAVE	: ONLY
		REC RATE: 12.5FPS, DURATION: 20SEC
		PRE-ALARM RECORDING	: OFF
		REC RATE: ***** FPS,	DURATION: *****
		ALARM TRIGGER	: ALARM
		MOTION SENSOR	->
[Settings] (‹ indicates default setting)
Setting		Description
BASIC (BA)	Basic
NORMAL (NO)	Normal
‹ENHANCED (EN)	Enhanced
FINE (FI)	Fine
SUPER FINE (SF)	Super Fine
INDIV.	Picture quality is set for each camera.

„Setting the picture quality for each camera

(1)Select “INDIV.” and turn the shuttle dial clockwise. The cursor moves to “PICTURE QUALITY”.

(2)Turn the shuttle dial clockwise.

The <PICTURE QUALITY SET> screen is displayed. On the DSR-5009P, cameras No. 01-09 are displayed.

		<PICTURE QUALITY SET>
CHANNEL		01	02	03	04	05	06	07	08
NORMAL REC		EN	EN	EN	EN	EN	EN	EN	EN
ALARM	REC	EN	EN	EN	EN	EN	EN	EN	EN
CHANNEL		09	10	11	12	13	14	15	16
NORMAL REC		EN	EN	EN	EN	EN	EN	EN	EN
ALARM	REC	EN	EN	EN	EN	EN	EN	EN	EN

(3)Turn the jog dial to select the camera number and then turn the shuttle dial clockwise.

“EN” flashes.

(4)Turn the jog dial to select the picture quality and then turn the shuttle dial clockwise.

The cursor moves to the next camera number.

(5)Set the picture quality for the other cameras in the same way.

(6)Turn the shuttle dial counter-clockwise.

The display returns to the <ALARM REC MODE SET> screen.

8 Turn the jog dial to select “AUDIO RECORDING” and turn the shuttle dial clockwise.

“OFF” flashes.

<ALARM REC MODE	SET>
ALARM RECORDING	: ENABLED
PICTURE QUALITY	: ENHANCED
PICTURE QUALITY SET	->
AUDIO RECORDING	: OFF
ALARM INTERLEAVE	: ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING	: OFF
REC RATE: ***** FPS,	DURATION: *****
ALARM TRIGGER	: ALARM
MOTION SENSOR	->

9 Turn the jog dial to select “ON” or “OFF” and then turn the shuttle dial clockwise.

The cursor moves to “ALARM INTERLEAVE”.

<ALARM REC MODE	SET>
ALARM RECORDING	: ENABLED
PICTURE QUALITY	: ENHANCED
PICTURE QUALITY SET	->
AUDIO RECORDING	: ON
ALARM INTERLEAVE	: ONLY
REC RATE:A12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING	: OFF
REC RATE: ***** FPS,	DURATION: *****
ALARM TRIGGER	: ALARM
MOTION SENSOR	->

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	Audio is not recorded.
ON	Audio is recorded.

zAudio recording is possible when “REC RATE” is set to 1 FPS or greater.

zWhen set to “ON”, the letter “A” (indicating that audio will be recorded) is displayed in front of “REC RATE”.

10 Turn the shuttle dial clockwise.

“ONLY” flashes.

<ALARM REC MODE	SET>
ALARM RECORDING	: ENABLED
PICTURE QUALITY	: ENHANCED
PICTURE QUALITY SET	->
AUDIO RECORDING	: ON
ALARM INTERLEAVE	: ONLY
REC RATE:A12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING	: OFF
REC RATE: ***** FPS,	DURATION: *****
ALARM TRIGGER	: ALARM
MOTION SENSOR	->

SETTINGS

94 English