Sanyo DSR-5009P instruction manual 128, Screen SET screen is displayed, 1S flashes for Full

4SCREEN SET

Setting the interval and monitors for automatic screen selection

Use the following procedure to scroll through video from all cameras at a specified interval.

The interval for automatic selection can only be set for full screen and quad display.

Example: Automatic switching of the full-screen display every 5 seconds.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “4.SCREEN SET” and then turn the shuttle dial clockwise.

The <SCREEN SET> screen is displayed.

3 Turn the jog dial to select “FULL” for “2.SEQUENCE SET” and then turn the shuttle dial clockwise.

“1S” flashes for “FULL”.

	<SCREEN SET>
1.MULTI SCREEN		:	NORMAL
QUAD POSITION SET			->
MULTI	9 POSITION SET		->
MULTI	16 POSITION SET		->
2.SEQUENCE SET
FULL	: 1S	QUAD : 1S
MAIN/MON.2 MONITOR SET			->
3.MASK		:	OFF
MASK SET			->
4.COLOR LEVEL SET			->

4 Turn the jog dial to set the interval to “5S” and then turn the shuttle dial clockwise.

Automatic selection is set to an interval of 5 seconds.

	<SCREEN SET>
1.MULTI SCREEN		:	NORMAL
QUAD POSITION SET			->
MULTI	9 POSITION SET		->
MULTI	16 POSITION SET		->
2.SEQUENCE SET
FULL	: 5S	QUAD : 1S
MAIN/MON.2 MONITOR SET			->
3.MASK		:	OFF
MASK SET			->
4.COLOR LEVEL SET			->

5 Use the same operation to set the switching interval for quad screen display.

“INDIV.” cannot be selected for “QUAD”.

zThe interval applies to all cameras on the main monitor and monitor 2. To set the interval for each camera when displaying video at full screen, select “INDIV.” in step 4 and then go to “MAIN/MON.2 MONITOR SET”.

zThe interval can be set anywhere between 1 and 30 seconds.

6 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

Setting the time period to switch the display on the main monitor and monitor 2

Example: Setting the display interval of each camera’s video for the main monitor and monitor 2.

1 Make timer settings for “TIME PERIOD A” and “TIME PERIOD B” on the <TIME PERIOD SET> screen. (JP.69)

Specify “TIME PERIOD A” and “TIME PERIOD B”.

2 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

SETTINGS

128 English