Sanyo DSR-5009P 120, Network settings, Making network connections, Making network settings

3GENERAL SET

Network settings

Use the following procedure to make menu settings for the digital video recorder and to monitor video from a PC via a network (LAN).

A LAN cable must be connected to the LAN terminal on the rear panel before proceeding.

Making network connections

zConnecting to a PC directly (without using a switch)

1 - 16

Making network settings

The setting is necessary for controlling the DVR from a PC on a network.

Contact the network administrator for more details on setting values.

zDHCP

Set whether the IP address is automatically acquired from the DHCP server or manually set. Set “ON” when automatically acquiring an IP address from an Internet service provider or from a DHCP server on a LAN, and set “OFF” when using a fixed IP address.

zIP ADDRESS

Select “OFF” for “DHCP” to set. Generally, a private IP address is used when a fixed IP address is set in a LAN (example: 192.168.0.0 – 192.168.255.255).

Be sure not to duplicate IP addresses from other devices.

1

1

3

MAIN

LAN

2

4

16

A crossed-type LAN cable must be used here. (10BASE-T/ 100BASE-TX Category 5)

zSUBNET MASK

Select “OFF” for “DHCP” to set. The same value is set throughout the LAN.

zGATEWAY

Select “OFF” for “DHCP” to set. When connecting from a LAN to a WAN or other differing network, specify the device IP address (on the LAN side).

zHTTP PORT

Sets open port. Default value is “80”.

zNETWORK SPEED

SETTINGS

Monitor PC (sold separately)

z Connecting to an intranet (using a switch)

	1 - 16
	MAIN
1	16
	LAN
	Switch
1	2
3	4

Monitor
(sold separately)	PC

Intranet A straight-type LAN cable must be used here. (10BASE-T/ 100BASE-TX Category 5)

PC

PCSwitch

Sets restrictions for traffic in the LAN. Normally, set it to “NO LIMIT”.

zDNS SET

Settings relating to the Domain Name Server are performed in another screen.

zDNS SERVER

Set whether the DNS server IP address is automatically acquired or manually set. Generally this setting is “AUTO” when “ON” is selected for “DHCP”. When the DNS server address is specified by a network administrator or Internet service provider, select “MANUAL” and set the following items, “PRIMARY” and “SECONDARY”.

zPRIMARY

zSECONDARY

Set when “DNS SERVER” is set to “MANUAL”. Set the DNS server address received from the network administrator or Internet service provider.

120 English