Sanyo DSR-5009P instruction manual 148

8ADVANCED MENU SET

3 Turn the jog dial to select “4.PPP SET” and then turn the shuttle dial clockwise.

The <PPP SET> screen is displayed.

(1)			<PPP SET>
(2)	DIAL UP		: OFF
(3)		DIAL UP SET	->
(4)	DIAL IN		: OFF
		DIAL IN SET	->
(5)
	CIRCUIT TYPE		: DTMF
(6)	MODEM INI. COMMAND :
(7)	BAUD RATE		: 115200 bps
	DATA SIZE		: 8 bits
(8)
	PARITY		: NONE
(9)	STOP BIT		: 1
(10)

(1) DIAL UP

Displays whether or not to use a dial-up connection.

(2) DIAL UP SET

Displays the <DIAL UP SET> screen. (J step 4)

(3) DIAL IN

Displays whether or not to use a dial-in connection.

(4) DIAL IN SET

Displays the <DIAL IN SET> screen. (J step 6)

(5) CIRCUIT TYPE

Displays the type of phone line connected to the modem.

(6) MODEM INI. COMMAND

Displays the AT command to control the modem.

(7) BAUD RATE

Display the communication speed.

(8)DATA SIZE Displays the data size.

(9)PARITY

Displays the parity.

(10)STOP BIT Displays the stop bit.

4 Turn the jog dial to select “DIAL UP SET” and then turn the shuttle dial clockwise.

The <DIAL UP SET> screen is displayed.

(1)	<DIAL UP SET>
(2)	PROVIDER TEL NO	:
(3)	LOGIN ID	:
(4)	PASSWORD	:
	AUTHENTICATION	: AUTO
(5)
	AUTO IP ADDRESS	: 0. 0. 0. 0

(1) PROVIDER TEL NO

Displays the phone number of the provider.

(2)LOGIN ID Displays the login ID.

(3)PASSWORD Displays the password.

(4)AUTHENTICATION

Displays the authentication protocol.

(5)AUTO IP ADDRESS Displays the automatic IP address.

5 Turn the shuttle dial counter-clockwise.

The display returns to the <PPP SET> screen.

	<PPP SET>
DIAL UP		: OFF
	DIAL UP SET	->
DIAL IN		: OFF
	DIAL IN SET	->
CIRCUIT TYPE		: DTMF
MODEM INI. COMMAND		:
BAUD RATE		: 115200 bps
DATA SIZE		: 8 bits
PARITY		: NONE
STOP BIT		: 1

6 Turn the jog dial to select “DIAL IN SET” and then turn the shuttle dial clockwise.

The <DIAL IN SET> screen is displayed.

(1)		<DIAL IN SET>
(2)	LOGIN ID	:
(3)	PASSWORD	:
(4)	AUTHENTICATION : AUTO
	IP ADDRESS	: 192.168.250.250

(5)CLIENT IP ADDRESS : 192.168.250.251

(1)LOGIN ID Displays the login ID.

(2)PASSWORD Displays the password.

(3)AUTHENTICATION

Displays the authentication protocol.

(4) IP ADDRESS

Displays the IP address of the digital video recorder.

(5)CLIENT IP ADDRESS Displays the IP address of the PC.

7 Press the [EXIT/OSD] button.

The display returns to the normal screen.

EXIT/OSD

SETTINGS

148 English