Sanyo DSR-5009P instruction manual 201, Click 8. Advanced Menu SET, Click 1. Alarm Notice SET

9ADVANCED MENU SET

ADVANCED MENU SET

1.ALARM NOTICE SET

2.CAMERA CONTROL SET

3.PPP SET

4.TIME ZONE/NTP SET

1. ALARM NOTICE SET

Use the following procedure to receive notification by e-mail when an alarm event or device malfunction occurs while the digital video recorder is connected to a network. To set this function, make the necessary e-mail settings.

1 Click the button on the operation panel.

The “MAIN MENU” is displayed.

2 Click “8. ADVANCED MENU SET”.

The “ADVANCED MENU SET” screen is displayed.

3 Click “1. ALARM NOTICE SET”.

The “ALARM NOTICE SET” screen is displayed.

ALARM NOTICE SET

4	ALARM NOTICE	: OFF
5	SMTP SERVER ADDRESS	:
6	USER MAIL ADDRESS	:
7	SEND MAIL ADDRESS	:	USE	MAIL ADDRESS	IMAGE
8		1	OFF		OFF
9		2	OFF		OFF
		3	OFF		OFF
		4	OFF		OFF
		5	OFF		OFF
		6	OFF		OFF
		7	OFF		OFF
11		8	OFF		OFF
	SUBJECT	:
12	AUTHENTICATION	: NO USE
13	POP3 SERVER ADDRESS	:
14	USER ID	:
15	PASSWORD	:
16			SAVE	TEST

4 Set “ALARM NOTICE” to “ON”.

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	Alarm notification is disabled.
ON	Alarm notification is enabled.

5 Set “SMTP SERVER ADDRESS”.

6 Set “USER MAIL ADDRESS” to the e- mail address from which notifications are sent.

7 Set “USE” in the unset column of “SEND MAIL ADDRESS” to “ON” or “OFF”.

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	Alarm notification is disabled.
ON	Alarm notification is enabled.

8 Enter the recipient’s e-mail address under “MAIL ADDRESS”.

9 Set “IMAGE” to “ON” or “OFF”.

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	An alarm image is not attached to the e-mail.
ON	An alarm image is attached to the e-mail.

10 Use the same procedure to set the e- mail addresses of other e-mail recipients.

Up to eight recipient e-mail addresses can be set.

11 Set “SUBJECT” to the subject of the notification e-mail.

12 Set “AUTHENTICATION” to select whether authentication is to be performed.

[Settings] (‹ indicates default setting)

Setting	Description
‹NO USE	User authentication is not performed.
POP3	POP3 (POP before SMTP) authentication is
	performed.
SMTP	SMTP authentication is performed.

13 Set the POP3 server address for “POP3 SERVER ADDRESS” when “AUTHENTICATION” is set to “POP3”.

14 Set the user ID for “USER ID” when “AUTHENTICATION” is set to “POP3” or “SMTP”.

15 Set the password for “PASSWORD” when “AUTHENTICATION” is set to “POP3” or “SMTP”.

16 Click [SAVE].

The setting is saved.

English 201