Sanyo DSR-5009P instruction manual 158, „ When control rights are switched to the unit

2NETWORK CONTROL

„When control rights are switched to the unit

Whenever the button on the operation screen of the PC is clicked, access is cancelled and control rights switch back to the unit. At the same time, the “NETWORK CONTROL” message from the unit’s on-screen display changes to “DISCONNECTED”.

zOnce the message changes to “DISCONNECTED”, it can be cleared by pressing any button on the unit.

01-01-05 00:00:00 REC REPEAT EN A ALARM 0000000

DISCONNECTED

02

„Forced disconnection from the unit

When security lock is not turned ON, press and hold the [SHUTTLE HOLD] button on the DVR for at least 2 seconds. When access is forcibly cancelled in this way, the “NETWORK CONTROL” message changes to “DISCONNECTED”.

zAccess from the PC is not permitted for a period of 10 seconds after access is cancelled.

Display on the PC

„When disconnected from the network

DSR-5016

DIGITAL VIDEO RECORDER

THE UNIT IS DISCONNECTED !

This screen is displayed in the following cases.

zConnection is forcibly terminated from the DVR unit.

zConnection is terminated manually by clicking the disconnect button.

zNetwork settings are changed while LV1 or LV2 user is connected to the network.

zUser ID and password are changed while LV1 or LV2 user is connected to the network.

„When network settings are changed

DSR-5016

DIGITAL VIDEO RECORDER

NETWORK DISCONNECTED !

PLEASE CONNECT TO THE NETWORK

WITH NEW SETTINGS !

This screen is displayed in the following cases.

zSettings on the DVR unit are changed.

zOwn User ID settings are changed.

„When connection to the network cannot be made because the DVR is being operated

DSR-5016

DIGITAL VIDEO RECORDER

THE UNIT IS NOT READY !

This screen is displayed in the following cases.

zCopying is made on the DVR unit.

zMenu is displayed on the DVR unit.

„When the number of users to be connected exceeds the concurrent connection restriction

DSR-5016

DIGITAL VIDEO RECORDER

THE UNIT IS BUSY !

This screen is displayed in the following cases.

zConnection via ID1 is attempted when 15 computers are already connected

zConnection via ID3 is attempted when ID4 user is already connected

zConnection via ID3 is attempted when ID3 user is already connected

zConnection via ID4 is attempted when ID4 user is already connected

zConnection is attempted when users are already connected to ID2, ID3 and ID4

NETWORK CONTROL

158 English