Sanyo DSR-5009P 100, Turn the jog dial to select a or B, Turn the shuttle dial clockwise twice

2RECORD SET

3 Turn the jog dial to select “2.RECORD SET” and then turn the shuttle dial clockwise.

The <RECORD SET> screen is displayed.

4 Turn the jog dial to select “7.ALARM REC MODE SET” and then turn the shuttle dial clockwise.

The <ALARM REC MODE SET> screen is displayed.

<ALARM REC MODE	SET>
ALARM RECORDING	: OFF
PICTURE QUALITY	: ENHANCED
PICTURE QUALITY SET	->
AUDIO RECORDING	: OFF
ALARM INTERLEAVE	: ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING	: ***
REC RATE: ***** FPS,	DURATION: *****
ALARM TRIGGER	: SENSOR
MOTION SENSOR	->

5 Turn the jog dial to select “MOTION SENSOR” and then turn the shuttle dial clockwise.

6 Press a [CAMERA SELECT] button.

Press the button of the number of the camera for which motion sensors are to be set up.

-

On the DSR-5009P, press the [CAMERA SELECT] 1-9 button.

7 Turn the jog dial to move the cursor (blue) to the position where a sensor is to be set and then turn the shuttle dial clockwise.

Turn the jog dial while pressing the [FUNC.] button to move the cursor (blue) vertically.

Cursor can be moved up and down using the jog dial if a mark indicating such actions is displayed in the upper right of the screen.

FUNC.

CH01 T-1 LEVEL : OFF MODE : A

8 Turn the jog dial to select “A” or “B”.

SETTINGS

The <MOTION SENSOR> screen is displayed.

The cursor (blue) is displayed at the top left position. Cursor can be moved to the left and right using the jog dial if a mark indicating such actions is displayed in the upper right of the screen.

<ALARM REC MODE	SET>
ALARM RECORDING	: ENABLED
PICTURE QUALITY	: ENHANCED
PICTURE QUALITY SET	->
AUDIO RECORDING	: OFF
ALARM INTERLEAVE	: ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING	: OFF
REC RATE: ***** FPS,	DURATION: *****
ALARM TRIGGER	: SENSOR
MOTION SENSOR	->

CH01 T-1 LEVEL : OFF MODE : A

A

“A” or “B” : Sensor set

“-” : No sensor

CH01 T-1 LEVEL : OFF MODE : A

9 Turn the shuttle dial clockwise twice.

The change is defined.

A

CH01 T-1 LEVEL : OFF MODE : A

10 Use the same procedure to set other sensor positions.

100 English