Sanyo DSR-5009P instruction manual 146

8ADVANCED MENU SET

7 When “2ND RS485/422” is selected for “PROTOCOL”, turn the jog dial to select “2ND RS485/422 PROTOCOL”, and turn the shuttle clockwise.

	<CAMERA CONTROL SET>
CH PROTOCOL		ADD	CH PROTOCOL		ADD
01	SANYO COAX1	001	09	OFF	---
02	BBV COAX	---	10	OFF	---
03	PELCO COAX	---	11	OFF	---
04	2ND RS-485/422	004	12	OFF	---
05	OFF	---	13	OFF	---
06	OFF	---	14	OFF	---
07	OFF	---	15	OFF	---
08	OFF	---	16	OFF	---

2ND RS485/422 PROTOCOL : OFF

8 Turn the jog dial to select the protocol to set and then turn the shuttle dial clockwise.

	<CAMERA CONTROL SET>
CH PROTOCOL		ADD	CH PROTOCOL		ADD
01	SANYO COAX1	001	09	OFF	---
02	BBV COAX	---	10	OFF	---
03	PELCO COAX	---	11	OFF	---
04	2ND RS-485/422	004	12	OFF	---
05	OFF	---	13	OFF	---
06	OFF	---	14	OFF	---
07	OFF	---	15	OFF	---
08	OFF	---	16	OFF	---

2ND RS485/422 PROTOCOL : BBV

zDATA SPEED for protocol set in “2ND RS485/422 PROTOCOL” is fixed.

Set the DATA SPEED on the camera in the following manner.

z PELCO: 2,400 bps

z KALATEL: 4,800 bps

z SENSORMATIC: 4,800 bps

z BBV: 9,600 bps

9 Press the [EXIT/OSD] button.

The setting is completed and the display returns to the normal screen.

EXIT/OSD

zCamera control address

The camera address is a fixed value and is as follows.

If a protocol other than SANYO COAX1, SANYO RS-485 or 2ND RS485/RS422 is selected, “---” is displayed for the cameral control address.

On the DSR-5009P, CH1-CH9 are available.

DVR/	Camera control		DVR/	Camera control
RS-485			RS-485
	address			address
address			address
DVR1:001	CH1	001	DVR2:002	CH1	017
	CH2	002		CH2	018
	CH3	003		CH3	019
	CH4	004		CH4	020
	CH5	005		CH5	021
	CH6	006		•	•
	CH7	007		•	•
						SETTINGS
	CH8	008		•	•
	CH9	009	DVR8:008	CH1	113
	CH10	010		CH2	114
	CH11	011		CH3	115
	CH12	012		CH4	116
	CH13	013		CH5	117
	CH14	014		•	•
	CH15	015		CH15	127
	CH16	016		CH16	000*1

*1 Cannot be operated from a VSP-9000 controller.

146 English