Sanyo DSR-5009P 101, Setting time periods, Setting sensitivity levels, Setting sensor modes

2RECORD SET

„To specify the start position and end position together within a range

(1)Turn the jog dial to move the cursor (blue) to the start position and then turn the shuttle dial clockwise.

(2)Turn the jog dial to select “A” or “B” and then turn the shuttle dial clockwise. (“A” or “B” are yellow.)

(3)Turn the jog dial to move the cursor (blue) to the end position and then turn the shuttle dial clockwise.

Start position
		A	A	A	A		A	A	A	A
		A	A	A	A		A	A	A	A
End position		A	A	A	A		A	A	A	A
	CH01			T-1		LEVEL : OFF MODE : A

Setting time periods

11 Turn the jog dial to select “T-1” and then turn the shuttle dial clockwise.

“T-1” flashes.

A

CH01 T-1 LEVEL : OFF MODE : A

12 Turn the jog dial to select the time period and then turn the shuttle dial clockwise.

The cursor moves to “LEVEL”.

A

CH01 T-1 LEVEL : OFF MODE : A

[Settings] (‹ indicates default setting)

Setting	Description
‹T-1	Time period T-1
T-2	Time period T-2
T-3	Time period T-3
T-4	Time period T-4

Setting sensitivity levels

13 Turn the shuttle dial clockwise.

“OFF” flashes.

A

CH01 T-1 LEVEL : OFF MODE : A

14 Turn the jog dial to select “OFF” or a sensitivity level between “1” to “10” and then turn the shuttle dial clockwise.

The cursor moves to “MODE”.

A

	CH01 T-1 LEVEL : OFF	MODE : A
[Settings] (‹ indicates default setting)
Setting	Description
‹OFF	Motion sensing is disabled.
1 to 10	Motion sensing is enabled. Lower numbers
	correspond to higher levels of sensitivity.

Setting sensor modes

15 Turn the shuttle dial clockwise.

“A” flashes.

A

CH01 T-1 LEVEL : OFF MODE : A

English 101