Sanyo DSR-5009P instruction manual 145, Camera control settings, Sanyo COAX2

8ADVANCED MENU SET

Camera control settings

Set when cameras with remote operation capability are connected.

To perform camera control for a SANYO camera, set “CONTROL” in the <RS-232C/RS-485 SET> screen to RS- 485. (JP.115)

Perform the following connections and set camera control to use in full screen display.

Connections necessary for remote operation:

zConnect coaxial control cameras to the VIDEO terminal.

zConnect the Sanyo RS-485 control camera to the RS-485 (RJ-11) terminal.

zConnect another maker’s RS485/422 control camera to the 2ND RS485/422 terminal.

zIf “ADDRESS” in the <RS-232C/RS-485 SET> screen (JP.116) is set to between “001” and “008”, camera control settings can be performed. Camera control settings are not available if “ADDRESS” is set to “000” or between “009” and “127”.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “8.ADVANCED MENU SET” and then turn the shuttle dial clockwise.

The <ADVANCED MENU SET> screen is displayed.

3 Turn the jog dial to select “3.CAMERA

CONTROL SET” and then turn the shuttle dial clockwise.

The <CAMERA CONTROL SET> screen is displayed.

		<CAMERA CONTROL SET>
CH PROTOCOL		ADD	CH PROTOCOL		ADD
01	OFF	---	09	OFF	---
02	OFF	---	10	OFF	---
03	OFF	---	11	OFF	---
04	OFF	---	12	OFF	---
05	OFF	---	13	OFF	---
06	OFF	---	14	OFF	---
07	OFF	---	15	OFF	---
08	OFF	---	16	OFF	---

2ND RS485/422 PROTOCOL : OFF

4 Turn the jog dial to select the camera number corresponding to a connected dome camera and then turn the shuttle dial clockwise.

The “PROTOCOL” input field flashes.

On the DSR-5009P, cameras No. 01-09 are displayed.

		<CAMERA CONTROL SET>
CH PROTOCOL		ADD	CH PROTOCOL		ADD
01	OFF	---	09	OFF	---
02	OFF	---	10	OFF	---
03	OFF	---	11	OFF	---
04	OFF	---	12	OFF	---
05	OFF	---	13	OFF	---
06	OFF	---	14	OFF	---
07	OFF	---	15	OFF	---
08	OFF	---	16	OFF	---

2ND RS485/422 PROTOCOL : OFF

5 Turn the jog dial to select a protocol and then turn the shuttle dial clockwise.

The cursor moves to the next “PROTOCOL” field.

	<CAMERA CONTROL SET>
CH PROTOCOL		ADD	CH PROTOCOL		ADD
01	SANYO COAX1	001	09	OFF	---
02	OFF	---	10	OFF	---
03	OFF	---	11	OFF	---
04	OFF	---	12	OFF	---
05	OFF	---	13	OFF	---
06	OFF	---	14	OFF	---
07	OFF	---	15	OFF	---
08	OFF	---	16	OFF	---

	2ND RS485/422 PROTOCOL : OFF
[Settings] (‹ indicates default setting)
Setting	Description
‹OFF	No protocol
SANYO COAX1	SANYO COAX
SANYO RS485	SANYO RS485
BBV COAX	BBV COAX
PELCO COAX	PELCO COAX
2ND RS-485/422	2ND RS-485/422
SANYO COAX2	SANYO COAX (High speed)

z“COAX” stands for coaxial control and the video signal and camera control signal. This requires no further wiring for signal control.

6 Use the same procedure to set the connection channels of other dome cameras.

English 145