Sanyo DSR-5009P instruction manual Watching Images, 163, Various ways of displaying live images

2WATCHING IMAGES

Monitored live images and recorded images can be viewed upon demand.

Note that switching to live or playback images, modifying the screen display and other similar operations have absolutely no effect on timer recording and alarm recording.

Switching to live images during playback

Click the button on the PLAYBACK area on the operation panel. When playback finishes, the screen switches back to the display of monitored live images.

Playing back recorded images

The following two methods are available for the playback of images.

PLAYBACK

Buttons used

for playback

Image		Playback method
specification
	Click the	button on the operation
	panel to switch to play mode and begin
	playback of images from the recording
	area in the order in which they were
	recorded.
When no images are	z When recorded images are played
specified for playback	back for the first time or when a reset
	is performed from the unit, playback
	starts from the beginning of the
	stored data.
	z Any subsequent playback starts at
	the last stop point.
	z Use the search function to find the
	required images from the data stored
	in the recording areas of the hard
When images are	disk.
	z When the image for playback has
specified for playback
	been identified using search mode,
	the play mode screen is
	automatically displayed and the
	specified image is played (JP.169).

The various ways of displaying live images

					Displays the current
CHANNEL				01	channel (camera)
					number while in full
					screen display
	01	02	03	04
	05	06	07	08	[CHANNEL] button
	09	10	11	12
	13	14	15	16

[QUAD] button [MULTI] button

Changing channels (cameras)

1 Click the [CHANNEL] button for the number to view.

The live image from the selected channel is displayed full screen.

Activating quad-screen display

1 Click the [QUAD] button.

Displays the images from channels (cameras) 1-4.

Continue to click the [QUAD] button to cycle to 5-8, 9-12, and 13-16.

On the DSR-5009P, the images change in order of 1-4, 5-8, 9- 3, etc.

To activate full screen display, click on the image or click the [CHANNEL] button.

Activating 9/16 screen display

The DSR-5009P can only display video in nine screens.

1 Click the [MULTI] button.

Multi 16 screen display is activated and all camera images can be viewed.

2 Click the [MULTI] button again.

Multi 9 screen display is activated and the images from channels (cameras) 1-9 are displayed.

3 Click the [MULTI] button again.

Multi 16 screen display is restored.

To activate full screen display, click on the image or click the [CHANNEL] button.

zVideo from each screen of the multi-screen display is updated at a speed appropriate for its channel. The updating speed is affected by network conditions.

English 163