Sanyo DSR-5009P instruction manual 181, Click 2. Record SET, Click 1. Recording Area SET

3RECORD SET

RECORD SET

1.RECORDING AREA SET

2.RECORDING CONDITIONS SET

3.NORMAL REC MODE SET

4.PROGRAM REC SET

5.TIMER SET

6.ALARM REC MODE SET

1. RECORDING AREA SET

The unit’s hard disk is separated into two independent recording areas. Furthermore, five different recording modes can be used for these two areas.

The memory capacity for each area is allocated as a percentage. (Setting units: 1%)

Recording	Recording		Recording method
area	mode
	Normal		Recording is performed by
		Manual	manual operation of the
	recording
			button on the operation panel.
			Recording is performed
	Timer	Automatic	automatically for the time
	recording		period set with “2-5. TIMER
			SET”.
Recording			Recording is performed
	Alarm	Automatic	automatically when an alarm
area	recording		is detected, as set with “2-6.
			ALARM REC MODE SET”.
			Automatic recording of images
			before an alarm occurs, as set
	Pre-alarm	Automatic	with “PRE-ALARM RECORDING”
			in “2-6. ALARM REC MODE
	recording
			SET”.
			This function is used together
			with alarm recording.
			The required images are
Archive			copied from another recording
	Copy	Manual	area and stored by manual
area
			operation of the	button on
			the operation panel.

1 Click the button on the operation panel.

The “MAIN MENU” is displayed.

2 Click “2. RECORD SET”.

The “RECORD SET” screen is displayed.

3 Click “1. RECORDING AREA SET”.

The “RECORDING AREA SET” screen is displayed.

RECORDING AREA SET

(1)	TOTAL CAPACITY	: 600 GB
	INTERNAL HDD	: 300 GB
	EXTERNAL HDD	: 300 GB

(2)	RECORDING AREA	: 80%
	AREA FULL RESET
	ARCHIVE AREA	: 20%
	AREA FULL RESET
		(3)

(1) Total capacity display

Displays the total capacity of the hard disk and the capacity of all internal and expansion hard disks.

zA maximum of six hard disks can be installed.

(2) Area-specific capacity display

Displays the capacity set by the unit for each recording area as a percentage of the total capacity.

zSetting and modification of recording area capacities cannot be made from a PC.

(3) Recording area reset

If the overwrite setting is “OFF”, recording automatically stops when the corresponding recording area becomes full. In this case, click [AREA FULL RESET] to overwrite from the beginning of each area. (Jstep 4)

Reset is not required in the following cases and, therefore, [AREA FULL RESET] is not displayed.

zWhen the overwrite setting is “ON”.

English 181