Sanyo DSR-5009P instruction manual 140

8ADVANCED MENU SET

7 Turn the jog dial to select the “QUALITY” setting and then turn the shuttle dial clockwise.

“OFF” flashes for “ACTIVE ROI”.

		<ROI SET>
CH-01		QUALITY	ACTIVE ROI
STATIC AREA 1	:	MIN	OFF
STATIC AREA 2	:	OFF	OFF
STATIC AREA 3	:	OFF	OFF

EFFECTIVE REC MODE : NORMAL REC

AREA/SENSITIVITY SET ---->

[Settings] (‹ indicates default setting)

Setting	Description
MIN	Lowest quality
LOW	Low quality
‹OFF	Normal
	(Same picture quality as outside ROI area)
HIGH	Fine
MAX	Best quality

8 Turn the jog dial to select “ON” or “OFF” and then turn the shuttle dial clockwise.

The cursor moves to “STATIC AREA 2”.

			<ROI SET>
	CH-01		QUALITY	ACTIVE ROI
	STATIC AREA 1	:	MIN	OFF
	STATIC AREA 2	:	OFF	OFF
	STATIC AREA 3	:	OFF	OFF
	EFFECTIVE REC MODE : NORMAL REC
	AREA/SENSITIVITY SET ---->
[Settings] (‹ indicates default setting)
Setting	Description
‹OFF	Activates ROI always
ON	Activates ROI only in areas with motion
	detected

9 Use the same procedure to set the “QUALITY” and “ACTIVE ROI” settings in “STATIC AREA 2” and “STATIC AREA 3”.

		<ROI SET>
CH-01		QUALITY	ACTIVE ROI
STATIC AREA 1	:	MIN	OFF
STATIC AREA 2	:	LOW	OFF
STATIC AREA 3	:	HIGH	OFF

EFFECTIVE REC MODE : NORMAL REC

AREA/SENSITIVITY SET ---->

10 Turn the shuttle dial clockwise.

The cursor moves to “EFFECTIVE REC MODE”.

		<ROI SET>
CH-01		QUALITY	ACTIVE ROI
STATIC AREA 1	:	MIN	OFF
STATIC AREA 2	:	LOW	OFF
STATIC AREA 3	:	HIGH	OFF

EFFECTIVE REC MODE : NORMAL REC

AREA/SENSITIVITY SET ---->

11 Turn the shuttle dial clockwise.

“NORMAL REC” flashes.

		<ROI SET>
CH-01		QUALITY	ACTIVE ROI
STATIC AREA 1	:	MIN	OFF
STATIC AREA 2	:	LOW	OFF
STATIC AREA 3	:	HIGH	OFF

EFFECTIVE REC MODE : NORMAL REC

AREA/SENSITIVITY SET ---->

12 Turn the jog dial to select the “EFFECTIVE REC MODE” setting and then turn the shuttle dial clockwise.

Set the recording mode to enable ROI.

		<ROI SET>
CH-01		QUALITY	ACTIVE ROI
STATIC AREA 1	:	MIN	OFF
STATIC AREA 2	:	LOW	OFF
STATIC AREA 3	:	HIGH	OFF

EFFECTIVE REC MODE : NORMAL REC

AREA/SENSITIVITY SET ---->

[Settings] (‹ indicates default setting)

Setting	Description
‹NORMAL REC	ROI is enabled during normal recording.
ALARM REC	ROI is enabled during alarm recording.
NORMAL/	ROI is enabled during normal and alarm
ALARM	recording.

SETTINGS

140 English