Sanyo DSR-5009P instruction manual 157, Disconnecting, Messages displayed when connected

2NETWORK CONTROL

zWhen the maximum number of PCs (15) is connected to the digital video recorder and then an upper-level user accesses the unit from a different PC, the most recent lower-level user is automatically disconnected and priority is given to the upper-level user.

An error message is displayed on the PC of the disconnected user. (JP.158)

zIf entry of an incorrect password is repeated or [Cancel] is clicked, [AUTHENTICATION ERROR] displayed.

zIf a user clicks a restricted button during computer control, the password input screen is displayed to verify the required user level.

4 Select a language and click [OK].

The operation screen is displayed and computer control is now enabled.

zA connection may not be possible via a proxy server. In this case, cancel the proxy settings.

zDue to certain PC performance levels and specifications, a portion of the video may not be displayed. In this case, go to [Tools] J [Internet Options] J [Temporary Internet Files] J [Settings] in Internet Explorer, and then reduce [Amount of disk space to use].

Disconnecting

1 Click the button on the operation screen of the PC.

The connection is cancelled and control rights are returned to the unit.

zTo forcibly cancel PC access from the unit, press and hold the [SHUTTLE HOLD] button for at least 3 seconds.

zAccess from the PC is not permitted for a period of 10 seconds after access is cancelled.

zThe access connection is also cancelled and control rights then switch back to the unit whenever communication with the PC is not possible for a period of about 1 minute or more.

zIf the browser is closed without clicking the button, approximately 1 minute is required before reconnection is possible.

Messages displayed when connected

Messages related to the switching of control or the network connection status may be displayed on-screen at any time.

Display on the unit

„When control rights are switched to the PC

“NETWORK CONTROL” is displayed on the monitor. The “NETWORK CONTROL” message is displayed when connected to a network, regardless of whether control is performed from the PC or the digital video recorder

01-01-05 00:00:00 REC REPEAT EN A ALARM 0000000

NETWORK CONTROL

02

zThe “NETWORK CONTROL” message is not displayed when the network control setting (JP.123) connection display is set to “OFF” using the unit’s setting menu.

English 157