„ To view pre-alarm video | Sanyo DSR-5009P guide

5SEARCHING FOR RECORDED VIDEO

3 Turn the jog dial to select the video for playback from the list.

A preview of the selected alarm video is displayed in the preview screen. In this case, the video at the time the alarm occurred is displayed.

	< ALARM SEARCH >
NO DATE	TIME CH	TOTAL ALARMS	:0000028
0000028 10-05	19:15 01	SEARCH	:0000028
0000027 10-05	18:57 02	CHANNEL :
0000026 10-05	18:55 03
0000025 10-05	18:52 03
0000024 10-05	22:05 01
0000023 10-05	21:59 05
0000022 10-05	21:33 04
0000021 10-05	21:25 06
MOVE:JOG		SELECT:SHUTTLE

zTo display the next or previous recording Turn the jog dial clockwise or counter-clockwise accordingly.

zPress the [ALARM] button to display the next eight

recordings, and for the previous eight recordings.

zTo end search mode

Press the [SEARCH] button. The SEARCH indicator turns off.

4 Turn the shuttle dial clockwise.

The selected recording is played back on multi 16 screens. Playback is also available for another camera image being recorded simultaneously.

On the DSR-5009P, the recording is played back on multi 9 screens.

01-01-05 00:00:00		EN A ALARM 0000028
SA 01	02	03	04

Entering an alarm number to search for an alarm video

1 In the search screen, press the [FUNC.] button and select “SEARCH”.

FUNC.	< ALARM SEARCH >
	< ALARM SEARCH >
NO DATE	TIME CH	TOTAL ALARMS	:0000028
0000028 10-05	19:15 01	SEARCH	:0000028
0000027 10-05	18:57 02	CHANNEL :
0000026 10-05	18:55 03
0000025 10-05	18:52 03
0000024 10-05	22:05 01
0000023 10-05	21:59 05
0000022 10-05	21:33 04
0000021 10-05	21:25 06
MOVE:JOG		SELECT:SHUTTLE

2 Turn the shuttle dial clockwise.

The “SEARCH” input field flashes.

	< ALARM SEARCH >
NO DATE	TIME CH	TOTAL ALARMS	:0000028
0000028 10-05	19:15 01	SEARCH	:0000028
0000027 10-05	18:57 02	CHANNEL :
0000026 10-05	18:55 03
0000025 10-05	18:52 03
0000024 10-05	22:05 01
0000023 10-05	21:59 05
0000022 10-05	21:33 04
0000021 10-05	21:25 06
MOVE:JOG		SELECT:SHUTTLE

3 Turn the jog dial and shuttle dial to select an alarm number.

Turn the shuttle dial to move through the field and turn the jog dial to select individual numbers (0 through 9).

OPERATION

05	06	07	08
09	10	11	12
13	14	15	16

zWhen searching by specifying a camera number, playback is performed on a full screen.

To view pre-alarm video

After beginning playback of an alarm video identified by an alarm search, use the shuttle dial to reverse playback.

Numbers can be entered with the camera number

1-9 buttons or the [QUAD] button (0).

	< ALARM SEARCH >
NO DATE	TIME CH	TOTAL ALARMS	:0000028
0000028 10-05	19:15 01	SEARCH	:0000028
0000027 10-05	18:57 02	CHANNEL :
0000026 10-05	18:55 03
0000025 10-05	18:52 03
0000024 10-05	22:05 01
0000023 10-05	21:59 05
0000022 10-05	21:33 04
0000021 10-05	21:25 06
MOVE:JOG		SELECT:SHUTTLE

38

English

Image 39

Sanyo DSR-5009P instruction manual Search screen, press the FUNC. button and select Search, „ To view pre-alarm video

Contents

About this manual Digital Video Recorder with Multiplexer Function Avoiding Electrical Shock and Fire PrecautionService Location Introduction Main featuresAccessories Symbols used in this manual Contents Network Control Contents Settings Network Settings Contents Network Operation Contents Other Protection of the HDD Before USEHDD and cooling fan are consumable components Important recordings Before USE Backup battery Names and Functions of Parts DSR-5016PFront panel DSR-5009P Names and Functions of Parts Rear panel Power cord holder Sensor Alarm OUT terminalsALL Reset button AC power socket AC RS-232C Pin locations Installation and ConnectionsConnecting the RS-232C terminal Basic connections DSR-5016P Connecting RS-485 control terminals Installation and Connections Operation Connecting to a 2ND RS485/422 terminalRS-485 termination switch settings Connect as above LAN connection Connecting a LAN terminalConnecting an amplifier Connecting alarm input terminals Operation Connecting Sensor Alarm OUT terminalsConnecting control terminals Connecting the power cord 01-01-05 000000 REC Repeat EN a Alarm Preparing for USEOperation display Press the EXIT/OSD button Preparing for USEChanging the display position of the operation display area Changing the language Setting the time Example Setting 830 on 26 OctoberTurn the shuttle dial clockwise Archive area Hard disk archive areaHard disk recording areas Recording area Press the Zoom button during monitoring of camera video Monitoring Video from a CameraViewing on a full screen Press the No Camera Select button Press the Quad button Monitoring Video from a CameraViewing on quad screens Press the Zoom button to return to normal magnification Press the Plus button during multi 9 screen display Viewing on multi 9 or multi 16 screensEnlarging video Press the Multi button Press the Sequence button Setting automatic full screen selectionSetting automatic quad-screen selection Automatic camera selection Viewing on a full screen Viewing on monitorPress the MON2 button Viewing on a quad screen Monitor Main monitor Viewing on multi 9 or multi 16 screens Displaying alarm video in full screen format MON2 indicator turns offMonitor Normal recording Timer recordingSet timer recording. JP.87 Press the Timer button Recording Alarm recording Pre-alarm recordingRecording Changing the playback speed PlayPlaying video on a full screen Fast-forward and fast-rewind playback Play Magnifying the playback videoPress the Zoom button during playback Viewing still images Frame advance forward/reversePlaying video on multiple screens Press the Multi button during Playback To view video from other camerasVideo on full, quad, multi 9 or multi Screens Motion Detection Search JP.45 Searching for Recorded Video Alarm log search Searching for Recorded Video„ To confirm normal recording Search Alarm searchTotal Alarms DATE/TIME Search input field flashes Entering an alarm number to search for an alarm video„ To view pre-alarm video Search screen, press the FUNC. button and select Search Channel input field flashes Entering a camera number to search for an alarm videoPress the FUNC. button Cursor moves to the list Alarm thumbnail search Press the Alarm button during playbackTo view alarm video before or after the current playback Search by entering an alarm number Turn the jog dial to select the video for playbackSearch screen, press the FUNC. button Recording END Time/date searchSearch by entering a camera number Recording TOP Turn the shuttle dial clockwise while Channel is selected Press the Camera Select 5 buttonSpecify the date and time Total Searching within the archive areaDate Start Motion Detection Search screen is displayed Entering an archive number to search for an alarm videoMotion detection search Cursor moves to Search Motion Sensor Setting the motion sensor for searchingStart END ‹OFF Set the motion sensor again Turn the jog dial to select Preview„ If not FOUND! is displayed Viewing video detected by the motion sensor Copying video to a CD-R/RW or DVD+R/+RW JP.54 Saving Copying Recorded VideoCopying video to the hard disk’s archive area JP.50 Copying video to a CompactFlash card or Microdrive JP.51 Set the time Saving Copying Recorded VideoCopying video to the hard disk’s archive area Press the Copy button Example Copying 20 images „ To cancel copyingCopying to a CompactFlash card or Microdrive Insert a CompactFlash card Maximum Turn the shuttle dial clockwise while Pictures is flashing Available space and write capacity are checked Viewing images copied to a CompactFlash card on a PC Copying to a CD-R/RW or DVD+R/ +RW Connect a recordable CD or DVD drive and insert a diskExample Copying the maximum video to the copy destination Cursor appears on Copy Start Number of images flashes Formatting a CompactFlash card, CD-RW or ‹COMPACTFlash Disc Writer Dcim Viewer YYMMDD99 Viewing images on a PC Turn the jog dial to select a function Menu Configuration and OperationsBasic menu operations Turn the jog dial to select an item Displayed settings are restored to their default values Menu Configuration and OperationsResetting menu items Movement and confirmation in sub-menus and setting screens Advanced Menu SET JP.138 Sets the ROI setting, alarm Sub-menu configurationPower LOSS/USED Time JP.133 Displays the date and time Copy Menu Settings JP.135 Stores and loads menu Initial SET Configuration Initial SET Setting the languageSetting the summer time Turn the jog dial to select Mode under Summer Time SET Summer time ends External clock settingSet the date and time Summer time begins Flashes Default setting is Detecting connected camerasExample Set to Setting camera titles Example Setting the title HALL-1STFL for Camera NoQuad Turn the jog dial to select H Setting holidaysExample Setting 26 October as a holiday Holiday SET screen is displayed Default setting is Set the day and month for item Setting time periods Operations during the specified time periods „ Setting automatic selection of camera video„ Masking camera video using a gray pattern „ Alarm recording using motion sensors Set the time for T-2 Timer period settingsExample 1 Setting periods using Time Period a Set the time for T-1 Timer period operations settings Time Period a flashesCursor moves to Time Period a Record SET Record SET Normal recording easy setupSetting based on recording days Alarm Operation SET JP.102 Makes settings for Example Timer recording from 8 AM to 8 PM Set the time for timer recording Setting based on recording rate Turn the shuttle dial counter-clockwiseExample on REC Rate Base 25 FPS/CAM Hard disk capacity Displaying the recording areasRecording Area SET screen is displayed Displays the total capacity of the hard disk Turn the jog dial to select YES „ Default hard disk settingsExample Setting the recording area to 50% Changing recording areas Recordings can now be made to the recording area Setting overwrite permission Setting recording conditions OFF‹ON Copy 01-01-05 000000 REC 5% EN a AlarmAuto Alarm ‹MANUAL Copy Setting auto deleting Setting normal recording Allowable „ Setting the picture quality for each cameraDefault setting OFF FPS flashes Select Individual Camera Rate Setting program recordingExample P-1 Program Recording rate is not set Program REC SET screen is displayedFlashes for Program Cursor moves to 01 under Select Individual Camera Rate FPS Timer setting items Timer settings Cursor appears in the bottom line Setting the Start and Stop timeIndicating the hour from Start flashes OFF flashes for SET EXT Use the same procedure to set other items„ To change a setting item To cancel all set timer reservations Line Make settings in the Week and Start columnsTimer recordings spanning more than 24 hours SAT in the Week column flashes OFF 5FPS Timer recording using an external timer Cursor moves to line Setting timer recording To set alarm recording Setting alarm recording Only flashes Cursor moves to Alarm Interleave ‹ONLY To set pre-alarm recording Cursor moves to PRE-ALARM RecordingNumber of alarms Alarm display Cursor moves to Alarm Trigger Pre-alarm recording is disabledPre-alarm recording is enabled Flashes Default setting 12.5FPS PRE display Setting alarm triggersNumber of alarms Use this setting to indicate how alarms are to be detected Level Setting the motion sensors Turn the shuttle dial clockwise twice Use the same procedure to set other sensor positions100 Turn the jog dial to select a or B 101 Setting time periodsSetting sensitivity levels Setting sensor modes To B Setting alarm operation and display102 „ To stop motion sensor recording 103 104 105 Canceling an alarm HDD SET JP.117 RS-232C/RS-485 SET JP.115 Makes settings whenGeneral SET 106 Setting data display 107General SET Setting display for video loss 108On flashes for Video Loss 109 Setting the buzzer 110 Setting the security lock LV4 111‹NORMAL Change Registering a user Setting user ID112 „ User level and privileges Enter a user ID Enter a passwordTurning on the key lock, password lock and network lock 113 Confirm the lock status During password lock, pressEnter the user ID and password 114 RS-485 flashes Setting RS-232C and RS-485115 RS-232C/RS-485 SET screen is displayed 116 Initializing the hard disk Setting mirroring117 Hard disk initialization and mirroring ‹MASTER 118 Switching playback disks 119Expanding Replacing and initializing the hard disk 120 Network settingsMaking network settings Switch Set Gateway 121Set IP Address Set Subnet Mask Set Http Port 122 123 Making network control settings 124 LV1 LV2 LV3 LV4 Setting user125 „ User levels and privileges Setting quad and multi 9/16 display Screen SET126 127 Screen SETChecking modified screen positions Automatic selection is set to an interval of 5 seconds 128Screen SET screen is displayed 1S flashes for Full Cursor moves to 1S for 01 and Main MON 129MAIN/MON.2 Monitor SET screen is displayed Flash for Time Period Channel not displayed Setting masks‹ 1S 30S Switching interval seconds 130 131 Use the same procedure to set other channels Color Level SET screen is displayed Setting the color levelSettings The default setting is 132 Power LOSS/USED Time 133Select Used Time and then turn the shuttle dial clockwise Action Initialization LOG134 Area 135 Copy Menu SettingsSaving menu settings Copy Menu Settings screen is displayed Jog dial 136 Copy Menu SettingsLoading menu settings Copy Menu Settings screen is displayed Cursor appears on Save Menus to CF Copying the recording area settingsUse the following procedure to copy recording area settings 137 138 Advanced Menu SET Advanced Menu SET Setting ROISetting the ROI 139 140 141 Response sensitivity is disabledResponse sensitivity is enabled. Lower Set Time LAG to OFF when Level is set English 1S 10S Setting ROI areas142 No operation after the response-stop Cursor the orange † moves to the top left of frame 143Set the areas in frame 2 and frame 3 in the same way Cursor moves to the bottom right 144 Setting alarm notification Sanyo COAX2 Camera control settings145 Sanyo COAX1 Sanyo Coax Sanyo RS485 BBV Coax Pelco Coax 146 Operating the camera with the digital video recorder Making PPP settings147 Click the buttons to operate the camera 148 GMT Dublin, Lisbon, London flashes Time zone/NTP setting149 Time Zone SET / NTP SET screen is displayed Example 150Set NTP Server Address Set Time to SynchronizePage Manual for Remote Operation by Network Connection Operations possible with PC control Digital video recorder network settingsGetting Prepared 153 Click Custom Level 154Getting Prepared Click the Security tab Click OK 155Click Network Connections Click Properties Network Control 156Controlling from a PC Select a language and click OK DisconnectingMessages displayed when connected 157 158 „ When control rights are switched to the unitDisplay on the PC „ When disconnected from the network „ When network settings are changed Operation panel 159 160 Operation Panel Functions and RestrictionsCamera operation panel Finishing dome camera operation 161 Stopping normal recording Recording Images162 Click the button on the operation panel Watching Images 163Various ways of displaying live images Performing operations in play mode 164Watching Images 165 Adjusting the image and audio Screen display items Normal Recording ModeAlarm Recording Mode 166 Downloading live images to a PC 167 When saving is completed, click OK on the pop-up window „ To cancel a save operation168 Search menu Search for video using the search mode screen169 Basic operation 170 Searching for Recorded Video Alarm LOG Search Searching for Recorded Video Alarm Search Alarm Thumbnail Search171 Click 4. TIME/DATE Search on the Search screen 172Searching for Recorded Video TIME/DATE Search Archive Area Search Specify the search area from the Search from pull-down menu 173Searching for Recorded Video Motion Detection Search Click 6. Motion Detection Search on the Search screen Enter the number of images for HOW Many 174Copying to the archive area Click Button on the operation Panel Downloading to a PC 175 Displays the download results 176 Click a menu on the Main Menu Settings177 Making menu selections Menu structure 178 179 Clock SETSummer Time SET/EXT. Clock SET Click 3. Holiday SET 180Holiday SET Click Save Click 1. Recording Area SET 181Recording Area SET Click 2. Record SET Recording Conditions SET 182 183 Record SET Normal REC Mode SET Click 4. Program REC SET 184Program REC SET Set REC Program Group to the desired program group Record SET Timer SET Click 5. Timer SET185 Setting alarm recording Record SET Alarm REC Mode SETClick 6. Alarm REC Mode SET Set Alarm Recording to the desired recording mode 187 Set Alarm Interleave to the desired recording patternSet Duration to the desired alarm recording duration Set PRE-ALARM Recording to on or OFF 15MIN Set Duration to the desired pre- alarm recording durationAlarm or 188 189 Display SETBuzzer SET Click 3. Security Lock SET To cancel the buzzer setting on the PC190 Security Lock SET General SET User ID SET Set user ID for User ID Set Password Set user level for LVSettings Description Level 191 Click 5. RS-232C/RS-485 SET 192RS-232C/RS-485 SET HDD SET Click 7. Network SET Change the settings as required193 Network SET Set Network Status to on or OFF 194Network Control SET Click 8. Network Control SET 195 Sequence SET 196 Set the following functions as required 197Screen SET Mask SET Click 2. Mask SET Power LOSS/USED Time Click 5. Power LOSS/USED Time198 199 Initialization LOGClick 6. Initialization LOG 200 Saving Menu SettingsLoading Menu Settings Click 7. Copy Menu Settings 201 Alarm Notice SETClick 1. Alarm Notice SET Set Alarm Notice to on Click 2. Camera Control SET 202Camera Control SET PPP SET NTP SET 203 Set Time Zone Setting is saved Click Renewal to manually update the time204 Click 4. Time ZONE/NTP SET Operating environment Installing DVR Viewer2DVR VIEWER2 205 Opening DVR Viewer2 206DVR VIEWER2 Opening and closing DVR Viewer2 Click Browse... to display the folder tree 207Opening files Click OpenO on the FileF menu Thumbnail window 208Viewing images Main window Rplay 209TOP Prev Printing images 210 211 Interface SpecificationsRS-485 specifications RS-232C specifications Interface Specifications DVR/VCR command table212 Specifications 213Jpeg 420 Specifications Dimensions214 Units mm 215 Specifications Table of recording rates and times 216 Specifications Table of recording rate settings 217Recording rates that cannot be selected English 218 Specifications Table of pre-alarm recording times 219 Specifications Terminal board specifications 220 Recording Area SET →P.77 Menu Setting Sequence221 Record SET →P.71 Network SET →P.120 Menu Setting SequencePower LOSS/USED Time → P.133 222 Dial UP SET →P.148 Alarm Notice SET →P.144223 Initialization LOG →P.134 Symbols Index224 225 Index112, 125 L8HBD/XE, L8HBF/XE 0405TR-SY