Topcon GTS-821A, GTS-822A, GTS-823A, GTS-825A instruction manual 3Setting Parameters of RC, Speed

2Press the [F2] key to select [2PARAMETER (CABLE)].

Speed setting screen will appear.

3Press the [F3](↑) or [F4](↓) key to select baud rate then press the [F1](SET) key to decide.

4Set bit format in the same way.

5Set DELIMITER (Terminate) in the same way.

6Set RTS in the same way.

7Set REC TYPE in the same way.

[F2]

[F3]

or

[F4]

[F1]

[F3]

or

[F4]

[F1]

[F3]

or

[F4]

[F1]

[F3]

or

[F4]

[F1]

5 PROGRAM MODES

SPEED
		9600
SET	↑	↓	EXIT
BIT FORMAT
D8		S1 NONE
SET	↑	↓	EXIT
TERMINATE
		ETX
SET	↑	↓	EXIT
RTS
		Hi
SET	↑	↓	EXIT
REC TYPE
		REC-A
SET	↑	↓	EXIT

Setting

1 CABLE/RADIO MODEM/RC

2 PARAMETER(CABLE)

3 PARAMETER(RC)

4 PARAMETER(RADIO MODEM)

lTo cancel the setting, press the [F6](EXIT)key or the [ESC] key.

(3)Setting Parameters of RC

Set the paameters forcommunication with remote controller system.

Parameters

1)Channel

Sets communication channel

The same channel must be set for GTS-820A series and RC-2RII. Set channels : 1, 2, 3

2)DELIMITER (Terminate)

Selecting CR (Carriage return), or LF (Line feed) will be added at the end of data. Set items:

ETX, ETX+CR, ETX+CRLF

3)Retry

This is a method to retry setting for sending data during communication with remote controller RC- 2RII.

Set items:

Standard, Divided

Standard: Gives good for fast communication. This is offered in normal condition.

Divided: Using in bad condition such in long distance, bad condition of sight, strong

5-25