Manuals / Brands / Lawn and Garden / Telescope / Topcon / Lawn and Garden / Telescope

Topcon GTS-821A, GTS-822A, GTS-823A, GTS-825A, GTS-822A, GTS-823A, GTS-825A 5-24 , 3, 4

1 144

Download 144 pages, 3.58 Mb

5-24

5 PROGRAM MODES

(2)Setting Parameters of Cable (RS-232C)

In case connecting Topcon's designated wireless modem, simply select communicatio n cours e as

"RADIO MODEM" it is enough to do setting of paramete r aut omatically.

In case connecting personal computer or othe r than T opcon's d esignate d wireless mod em, it is requ ired

to do parameters setting for R S-232C before usi ng.

Parameters

1) SPEED (Baud rate)

Sets communication s peed

Set items: 1200, 2400, 4800, 9600bps

2) BIT FORMAT

Select the communication format.

Set items:

Bit length : 7 : D7, 8 : D8

Stop bit : 1 : S1, 2 : S2

Parity bit : NONE, ODD, EVEN

3) DELIMITER (Terminate)

Selecting CR (Carriage return), or LF (Line feed) will be added at the end of data.

Set items:

ETX, ETX+CR, ETX+CRL F

4) RTS (Control of signal line)

Select default output of signal line

Set items:

Hi : High level (Normal)

Low : Low level (It becomes High level only when data are transmitted.)

5) REC TYPE

Select the option to record the data for the distance measurement.

REC-A : Measure the distance again and record the updated distance.

REC-B : Record the data for the last distance measurement on the display.

3Select communication course by pressing the

[F3](↑) or [F4](↓) key.

(Sample setting :RC )

[F3]

or

[F4]

4Press the [F1](SET) key to decide. [F4]

lTo cancel the setting, press the [F6](EXIT)key or the [ESC] key.

Operating procedure Operation Display

Execute Section 5.7.1“Starting compatible

communication program of AP-L1A” to start

[EXT.LINK] of compatible communication

program of AP-L1.

1Press the [F2](Setting) key. [F2]

CABLE/RADIO MODEM/RC

RC

SET ↑ ↓ EXIT

Setting

1 CABLE/RADIO MODEM/RC

2 PARAMETER(CABLE)

3 PARAMETER(RC)

4 PARAMETER(RADIO MODEM)

EXTERNAL LINK

1 Execute

2 Setting

Setting

1 CABLE/RADIO MODEM/RC

2 PARAMETER(CABLE)

3 PARAMETER(RC)

4 PARAMETER(RADIO MODEM)

Contents

Main Page 1 FOREWORD General Handling Precautions Page Display for Safe Use Safety Cautions User Exceptions from Responsibility CAUTION Laser Safety Labels CAUTION Contents 1 NOMENCLATURE AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 2 PREPARATION FOR MEASUREMENT . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 3 AUTOMATIC TRACKING / AUTOMATIC COLLIMATION . . . . . . . . . . 3-1 4 STANDARD MEASUREMENT MODE . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 6 MEMORY MANAGE MODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 7 COMMUNICATION MODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 8 PARAMETERS SETTING MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 9 CHECK AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 12 CORRECTION FOR REFRACTION AND EARTH CURVA TURE . . . 12-1 Page Standard Set Composition 1-1 1 NOMENCLATURE AND FUNCTIONS 1.1 Nomenclature 1-2 1-3 1.2 Display 1.3 Operating Key 1-4 * 1.4 Function Key (Soft Key) V : 8755'45"5 HR: 18044'12"5 SD HD NEZ 0SET HOLD 1-6 1-7 1.5 Star key (*key) mode Screen 3 2003-10-10 14:30:40 Screen 1 Screen 2 1-8 X:------------- Y:------------- 1-9 512KB 1-10 Meaning of Tracking Indicator ON or Flashing 1.6 Auto Power Off 1.7 Data Output 1.8 Rotating Method 1-12 1.9 Using together with RC-2II Remote Control System Turn-round function 1-13 1.10 Using connecting with Personal Computer (PC) 2-1 2 PREPARATION FOR MEASUREMENT 2.1 Power Connection (unnecessary if on-board Ni-MH battery BT-56Q is used) 2-2 2.2 Setting Instrument Up For Measurement Reference: Leveling and Centering t he Instrument 2-3 2.3 Power Switch Key ON 2-4 2.4 Battery Level Indicator 2-5 2.5 Main Menu Icons STANDARD MEASUREMENT MODES PROGRAM MODES ( APPLICATION MEASUREMENT) COMMUNICATION MODES ADJUSTMENT MODES 2.6 Vertical and Horizontal Angle Tilt Correction X: Y: 2-7 2.7 Compensation of Systematic Error of Ins tru m ent 1 2 3 4 2.8 Resume Mode ON/OFF 2.9 How to Enter Numerals and Alphabet Letters 1 2 3 2.10 Memory Card How to extract a memory card How to insert a memor y card 2-10 2.11 Inclination of Prism and Measuring Error Prism constant value : 30mm Prism constant value : 0mm 2-11 (Example) Angle error = Angleerror range Measuring dis cetan -------------------------------------------- ---------- 3 AUTOMATIC TRACKING / AUTOMATIC COLLIMATION 3.1 Automatic Tracking WARNING CAUTION 1 3-2 4 Searching status status Waiting status Automatic tracking Normal mode 3.2 Automatic Collimation 1 2Press the star [*] key. [*] 3 4 3.3 Range of Laser for Auto-tracking and Auto-collimating 3-5 3.4 Setting Parameters for Auto -Tracking 3.4.1 Setting Items 1) Search Patterns 2) Search Range 3-6 3) Wait Time 4) Tracking Speed 5) Reflector type 6) Prediction operating time Page 4-1 4 STANDARD MEASUREMENT MODE 4.1 Angle Measurement 4.1.1 Measuring Horizontal Angle Right and Vertical Angle 1 2 4-2 4.1.2 Switching Horizontal Angle Right/Left 4.1.3 Measuring from the Required Horizontal Angle 1) Setting by Holding the Angle 1 4-3 2) Setting a Horizontal Angle from the Keys 4.1.4 Vertical Angle Percent Grade(%) Mode 1 3 4-4 4.1.5 Automatic Rotation to a Required Horizontal and Vertical Absolute Angle <Rotating...> 1 2 3 4 4.2 Distance Measurement 4-6 4.2.4 Distance Measurement (Single/N-times Measurement) 1)Setting the number of times 2)Measuring Method 1 4-7 4-8 4.2.5 Fine / Coarse Measuring Mode 1 2 3 4-9 4.2.6 Stake Out (S-O) Display value = Measured distance -Standard (Preset) distance 1 2 3 4.3 COORDINATE MEASUREMENT 4.3.1 Setting Coordinate Values of Occupied Point 1 3 N 4-11 4 4-12 4.3.2 Setting of the Instrument Height / Prism Height 1 3 4 4-13 4.3.3 Execution of Coordinate Measuring 1 2 3 4 4-14 4-15 4.4 DATA OUTPUT 1 2 3 Page 5-1 5 PROGRAM MODES 5-2 5.1 Setting a Direction Angle for Backsight Orientation (Entering the in strument and backs ight coordinate values) 1 2 3 4 5 5.2 Retaining a Coordinate (STORE- NEZ) 1 2 3 4 5-4 5 6 7 8 9 10 5.3 Remote Elevation measurement (REM) 1) With prism height (h) input (Example :h=1.5m) 1 2 3 4 5 Page Page 5-8 5.4 Missing Line Measurement (MLM) 1 2 5-9 3 4 5 6 7 Page 5-11 5.5 Line Measurement (LINE) 1 2 3 4 5-12 5 6 7 8 Page 5-14 5.6 Offset measurement (OFFSET) lOutputting the Measurement Data lDistance measurement mode of the offset measurement 5-15 5.6.1 Angle Offset 3 1 5-16 4 5 6 7 A 5-18 4 5 6 7 5-19 5.6.3 Plane Offset Measurement P 1 3 5-20 4 5 6 7 5-21 5.6.4 Column Offset Measurement 1 3 4 5-22 5 6 7 8 5.7 External Link 5.7.1 Starting compatible communication program of AP-L1A 5.7.2 Setting for the communication (1)Setting communication course 1 5-24 (2)Setting Parameters of Cable (RS-232C) 3 4 5-25 (3)Setting Parameters of RC Parameters 2 3 5-26 (4)Setting Parameters for Radio Modem Parameters 2 3 5-27 5.7.3 Carrying out Communication 2 3 1 6 MEMORY MANAGE MODES 6.1 View Internal Memory and Car d Memory Status 1 2 6-2 6.2 Protect a File 6.3 Rename a File 2 3 4 2 6.4 Deleting a File 6.5 Copy a File 2 3 4 6.6 Initializing Memory 1 2 3 4 5 7-1 7 COMMUNICATION MODES 7.1 Setting of PROTOCOL 1 2 7-2 7.2 Data File In 7.3 Data File Out 1 2 3 8-1 8 PARAMETERS SETTING MODE 8.1 Parameter Setting Options 8.1.1 Parameters for Measurement and Display 8-2 8-3 8.1.2 Parameters for communication Setting parameter for RC Serial port Setting parameters for RS232C 8-4 8.2 Setting Parameters 8-6 8.2.2 Parameters for Communication 8.2.3 Password Option Establishing a Password 1 2 8-7 Turning OFF the Password Turning OFF the Password Option 2 3 8-8 Changing a Password Changing the Password 4 1 9 CHECK AND ADJUSTMENT 9.1 Checking and Adjusting of Instrument Constant 9-2 9.2 Checking the Optical Axis H direction confirmation (Do not move V direction). 9-3 Vertical direction confirmation (Do not move Horizontal direction). 9-4 9.3 Checking/Adjustin g the Theodolite Functions 9-5 9.3.1 Checking /Adjusting the Plate Level 9.3.2 Checking /Adjusting the Circular Level 9-6 9.3.3 Adjustment of the Vertical Cross-hair 9-7 9.3.4 Collimation of the Instrument 9-8 9.3.5 Checking / Adjusting the Optical Plummet Telescope 9-9 9.4 Adjustment of Compensation Systematic Error of Instrument 1 2 3 4 5 Page 9.5 Showing Constant List and Switch ON/OFF Compensation Systematic Error of Instrument 9-12 9.6 How to adjust the date and time 1 2 3 4 5 6 9.7 How to Set the Instrument Constant Value 1 2 3 4 5 9-14 9.8 Reference Frequency Checking Mode 1 2 3 4 9-15 9.9 Inspection and Adjustment of Optic Axis for Auto -Tracking 1 2 3 4 5 9-16 8 9 10 SETTING THE PRISM CONSTANT VALUE 11-1 11 SETTING ATMOSPHERIC CORRECTION 11.1 Calculation of Atmospheric Correction 11.2 Setting of Atmospheric Correction Value 1 2 Page 11-3 Page Page 12-1 12 CORRECTION FOR REFRACTION AND EARTH CURVATURE 12.1 Distance Calculation Formula 13-1 13 POWER SOURCE AND CHARGING 13.1 Rechargeable Battery BT-56Q 13-2 14-1 14 DETACH/ATTACH OF TRIBRACH 15-1 15 BATTERY SYSTEM 16-1 16 PRISM SYSTEM 17-1 17 PRECAUTIONS 18-1 18 ERROR DISPLAYS 19-1 19 SPECIAL ACCESSORIES 19-2 19-3 20-1 20 SPECIFICATIONS 20-2 20-3 20-4 APPENDIX-1 APPENDIX 1 Dual Axis Compensation APPENDIX-2 APPENDIX-3 2 Precaution when Charging or Stor i ng B a tteries APPENDIX APPENDIX-4 Fig.1 Recharging Fig. 2 Discharge Fig. 3 Storage END USER LICENSE AGREEMENT SOFTWARE LICENSE AGREEMENT (Embedded Products) APPENDIX WARRANTY AND SPECIAL PROVISIONS LIMITED WARRANTY EMC NOTICE Page TOPCON CORPORATION AUTO TRACKING TOTAL STATIO N GTS-820A