Nortec MH Series 1.1.6Setting the Cleaning Mode MHTC Reflow only, Factory setting Drain, 10-10

1.1.6Setting the Cleaning Mode (MHTC Reflow only)

NOTE: The cleaning mode may only be set with the MHTC Reflow. With the cleaning mode you determine whether the humidification boxes will be washed simultaneously during a draining or operation dependent draining /cleaning cycle. This option does not appear for other models.

Select “Clean Mode” in the settings menu, then press the <Set> key. In the upcoming modification dialogue select the desired cleaning/draining mode.

Factory setting: Drain

Options: Drain (draining only)

Wash (Draining w/box cleaning)

NOTE: During operation, the washing process of the humidification boxes can lead to a temporary humidity increase.

10-10

Page 15 2008-12-03