3.2EXPLANATION OF UNIT INFORMATION
Path: Main menu > Info > Unit Status
Press <> and <> keys, in order to select the unit information available in the list:
– System Operation Hour:
Total operating hours of the control unit (unit on) since the initial commissioning of the unit.
– Relay Humidity:
Actual status of the remote indication relay “Humidify”.
– Relay Service:
Actual status of the remote indication relay “Service”.
– Relay Error:
Actual status of the remote indication relay “Error”.
– Relay Unit On:
Actual status of the remote indication relay “Unit on”.
– Drain Valve:
Actual operating status of the drain valve.
– Inlet Valve:
Actual operating status of the inlet valve.
– Pump:
Actual operating status of the circulation pump.
– UV Lamp:
Actual operating status of the UV lamp
–Stage 1 Valve: Actual operating status of the step valve 1
–Stage 2 Valve: Actual operating status of the step valve 2
–Stage 3 Valve: Actual operating status of the step valve 3
–Pressure Sensor (MHTC Flow only):
Actual operating status of the minimum pressure switch
–Max Level Sensor (MHTC Reflow only):
Actual operating status of the minimum level sensor
–Thermal Contact (MHTC Reflow only):
Actual operating status of the thermal contact (pump motor protection)
– Extension Present:
Indication, whether or not a unit extension is present.
– Wash Demand:
Actual status of the external demand triggering a wash cycle.
Press the <Esc> key several times to quit the information list and to return to the standard operating display.
