![1.OPEARTIONAL FUNCTIONS](/images/new-backgrounds/51084/5108455x1.webp)
1.OPEARTIONAL FUNCTIONS
1.1CARRYING OUT MANUAL DRAINING / PIPE FLUSHING
To carry out a manual draining (MHTC Reflow) or pipe flushing (MHTC Flow) proceed as follows:
Drain | 1. Briefly press the drain key. The drain/flush |
| dialogue appears in the display. |
|
|
| 2. Press the <Start> key. |
| – Models MHTC Reflow: The drain valve opens |
| after a delay of up to 3 minutes and the water tub |
| empties. The yellow LED flashes. |
| – Model MHTC Flow: The inlet valve and the |
| flushing valve open and the pipe is flushed. The |
| yellow LED flashes. |
| To stop the drain/flush cycle press the <Stop> key. |
| Note: By pressing the <Esc> key the control unit |
| returns to the standard operating display. A |
| drain/flush cycle in progress will be stopped |
| automatically. |
|
|
Page 24