FACTORY DEFAULTS
FACTORY DEFAULT SETTINGS
Setting | Description | Default |
|
| Value |
|
|
|
(P1) Auger Period | Time limit for the upper auger period of | 16 sec |
| operation. Display in is 1/10th sec. |
|
|
|
|
(P2) Cold Stove Temp | Low temperature limit that a warm stove | 95 deg F |
| must reach in order to shut down com- |
|
| pletely. |
|
|
|
|
(P3) Hot Stove Temp | Maximum temperature limit that the stove | 350 deg F |
| is allowed to reach before ceasing to feed |
|
| fuel. |
|
|
|
|
(P4) Hot Stove Hysterisis | Temperature differential below the Hot | 1 deg F |
| Stove Temp that the stove must reach be- |
|
| fore resuming operation. |
|
|
|
|
(P5) Room Air On Temp | Minimum temperature that the stove must | 115 deg F |
| reach before the room air fan will operate. |
|
|
|
|
(P6) Auger Load Time | Time limit that the auger will feed fuel dur- | 15 sec |
| ing the |
|
| ing the automatic igniter. |
|
|
|
|
(P7) Igniter On Time | Time limit that the automatic igniter is en- | 8 min |
| gaged during the |
|
|
|
|
(P8) | Time limit that the stove will be allowed to | 15 min |
| operate before the Room Air On Temp |
|
| must be reached. |
|
|
|
|
(P9) Factory Defaults | Selecting this variable will reset all of the | - |
| variables to the factory defaults. |
|
|
|
|
(PA) Room Fan On Temp | High temperature limit that will cause the | 290 deg |
| stove to reduce the fuel feed rate by 25% |
|
| and maximize the room air fan speed. |
|
|
|
|
(PB) Auger Start Operation | Variable to control the auger fuel feed dur- | 0 |
| ing |
|
|
|
|
(PC) Auger Operation Select | Variable to set the upper auger period of | 1 |
| operation. (0 = 4 sec, 1 = 6 sec) |
|
|
|
|
