OPERATION

4)Check that both augers and the exhaust blower are operating (the room air blower will not start at this time). DO NOT open the viewing door, the auto-start igniter will get very hot during this test. The stove will auto- matically shut down after approximately 23 minutes.

START-UP PROCEDURE

Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start or ’freshen up’ a fire in this stove. Keep all such liquids well away from the stove while it is in use.

1)Verify that the hopper is clean and free of foreign matter.

2)Verify that all of the required exhaust/inlet connections have been made in accordance with this manual and that the stove is plugged into an outlet (an outlet surge protector is highly recommended).

3)Fill the hopper with wood pellets; do not allow any part of the bag or any other foreign material into the hopper, as this may jam the augers.

4)Ensure that all pellet matter is cleared from the hopper gasket seating surface.

5)Close the hopper lid and secure the latch.

6)Make sure that the viewing door and ash pan slides are securely closed (the safety pressure switch will not allow the stove to feed fuel if there is no draft pressure inside the stove) .

7)Press the “ON” button on the control pad and set the “HEAT SETTING” to “5”.

8)The stove will begin to feed fuel and the auto-start igniter will ignite the fuel in approximately 5 minutes.

Once a consistent flame has been established, you can adjust the “HEAT RANGE” and “BLOWER SPEED” on the control pad to your desired settings. (Note: The room air fan will not function until the heat exchanger in the stove reaches the factory preset temperature).

First Fire: Adjust the “HEAT RANGE” and “BLOWER SPEED” to a “5” setting and allow the stove to operate in this manner for approximately three (3) hours (or more if necessary), allowing the stove to “cure out” as the paint and oils from the manufacturing process burn off. We recommend that you open doors and windows in your home during this process.

SHUT DOWN PROCEDURE

WARNING: Never shut down this unit by unplugging it from the power source.

Press the “OFF” button on the control pad to put the stove in shut down mode. At this time, the red light above the pad will illuminate. Once this is done, the top auger will stop feeding pellets to the bottom auger, but the room air fan, exhaust blower, and bottom auger will continue to operate. When the internal temperature of the unit drops below the factory preset temperature, the room air fan, exhaust blower, and bottom auger will cease to operate. The red light will then shut off and the unit will be completely shut down.

The hotter the unit is during its operation, the longer it will take for the stove to complete the shut down cycle. If the stove stays on for more than 2 hours after pressing the “OFF” button and you are sure that the fire is out, the stove can be unplugged from the outlet. After approximately 10 seconds, the unit can be re-connected to the power source and the control board will be reset.

-15-

Page 14 Page 16
Page 15
Image 15
United States Stove 5700 owner manual START-UP Procedure, Shut Down Procedure
Page 14 Page 16

5700 specifications

The United States Stove 5700, a leading model in the world of indoor heating, combines efficiency and modern technology to deliver powerful warmth for homes, especially during the colder months. As a pellet stove, the US Stove 5700 primarily runs on compressed biomass pellets, making it an environmentally friendly alternative to traditional wood-burning stoves. Its design reflects both functionality and aesthetics, ensuring it complements a variety of home decors.

One of the standout features of the 5700 is its impressive heating capacity. With the ability to heat spaces up to 2,200 square feet, it is well-suited for large living areas, making it an ideal choice for families or anyone who desires ample warmth in their home. The stove's hopper has a generous capacity, allowing for extended burn times without the need for frequent reloading. This feature translates to convenience, as users can enjoy hours of consistent heat without interruption.

The United States Stove 5700 is equipped with advanced ignition technologies, including an automatic start function that simplifies the lighting process. With a push of a button, users can enjoy a roaring fire without the hassle of matches or kindling. Additionally, the adjustable thermostat enables users to maintain their desired temperature with ease, enhancing comfort while ensuring energy efficiency.

Another significant aspect of the 5700 is its user-friendly control panel. This feature allows for straightforward operation, even for those new to pellet stoves. The digital display provides vital information, including temperature settings and operational status, making it easy to monitor performance at a glance.

In terms of safety, the US Stove 5700 is designed with multiple safeguards, like a thermal shutdown switch and automatic shutdown features, ensuring peace of mind for homeowners. The sturdy construction and durable materials used in the stove’s design contribute to its longevity, while also meeting safety standards.

Moreover, the clean-burning technology employed in the United States Stove 5700 minimizes emissions, making it a responsible choice for environmentally conscious consumers. Overall, the United States Stove 5700 stands out as a reliable, efficient, and stylish heating solution that meets the diverse needs of modern households. Whether you need consistent heating for a large space or are looking for a sustainable heating alternative, the United States Stove 5700 is an excellent choice that combines functionality with modern technology.
Top Page Image Contents