Fujitsu AST12, AST9 Sleep Timer Operation, To Use the SLEEP timer, To Change the Timer Settings

Models: AST7 AST9 AST12

1 20
Download 20 pages 27.65 Kb
Page 11
Image 11
SLEEP TIMER OPERATION

SLEEP TIMER OPERATION

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).

Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped.

To Use the SLEEP timer

While the air conditioner is operating or stopped, press the SLEEP button (Fig. 5 D).

Both the indoor unit’s OPERATION indicator lamp (red) (Fig. 3 5) and the TIMER indicator lamp (green) (Fig. 3 6) will light.

To Change the Timer Settings

To Cancel the Timer:

Use the TIMER button to select “TIMER RESET”.

The air conditioner will return to normal operation.

To Stop the Air Conditioner During Timer Operation:

Press the START/STOP button.

Press the SLEEP button (Fig. 5 D) once again and set the time using the SET TIME buttons (Fig. 5 F).

Set the time while the Timer Mode Display is flashing (the flashing will continue for about five seconds).

To Use the SLEEP timer button: Press to advance the time. To Change the Timer Settings button: Press to reverse the time.

About five seconds later, the entire display will reappear.

About the SLEEP timer

To prevent excessive warming or cooling during sleep, the SLEEP timer function automatically modifies the thermostat set- ting in accordance with the time setting. When the set time has elapsed, the air conditioner completely stops.

*During Heating operation:

When the SLEEP timer is set, the thermostat setting is automatically lowered 1 °C every thirty minutes. When the thermostat has been lowered a total of 4 °C, the thermostat setting at that time is maintained until the set time has elapsed, at which time the air conditioner automatically turns off.

During Cooling/Dry operation:

When the SLEEP timer is set, the thermostat setting is auto- matically raised 1 °C every sixty minutes. When the thermo- stat has been raised a total of 2 °C, the thermostat setting at that time is maintained until the set time has elapsed, at which time the air conditioner automatically turns off.

SLEEP timer setting

 

 

SLEEP timer setting

 

 

 

 

 

1 °C

2 °C

3 °C

Set time

 

 

4 °C

 

 

 

 

 

 

 

 

30

 

 

1 hour

 

minutes

 

 

 

 

1 hour

 

 

1 °C

2 °C

 

 

 

 

1 hour

30 minutes

Set time

10

Page 11
Image 11
Fujitsu AST12, AST9 Sleep Timer Operation, To Use the SLEEP timer, To Change the Timer Settings, During Heating operation