Fig. 1 Indoor Unit
1Operating Control Panel (Fig. 2)
2 MANUAL AUTO button
3Remote Control Signal Receiver
4Indicator Lamps (Fig. 3)
5OPERATION Indicator Lamp (red)
●Lights when unit is operating.
*● The lamp will flash slowly when the de- frosting operation (see page 17).
*● The lamp will flash quickly (1 second on, 1 second off) when the selected operating mode can not be used (see page 18).
6TIMER Indicator Lamp (green)
●If the TIMER indicator lamp flashes when the timer is operating, it indicates that a fault has occurred with the timer setting (see page 17 Auto Restart).
7SWING Indicator Lamp (orange)
8Intake Grille (Fig. 4)
9 Air Filter
0 Air Flow Direction Louver A
(behind Air Flow Direction Louver) B Drain Hose
C Air Cleaning Filter
Fig. 5 Remote Control Unit 
DSLEEP button
EMASTER CONTROL button
FSET TEMP./SET TIME buttons (
) G Signal Transmitter
H TIMER button
I FAN CONTROL button J START/STOP button
K AIR FLOW DIRECTION button L SWING LOUVER button
M TIME ADJUST button N ACL button
Rear side (Fig. 6)
OTEST RUN
●Touch the two metal contacts with a me- tallic object to send the signal to perform a test run.
●Perform a test run only when installing the air conditioner. If the signal to perform a test run is received during normal opera- tion, the air conditioner’s thermostat will malfunction.
●If the signal to perform a test run is re- ceived during normal operation, the unit will switch to the test operation mode and the indoor unit’s OPERATION and TIMER indicator lamps will flash simultaneously.
●To stop the test operation mode, press the START/STOP button to stop the air condi- tioner.
PRemote Control Unit Display (Fig. 7) Q Transmit Indicator
R Clock Display
S Operating Mode Display T T imer Mode Display U Fan Speed Display
V Temperature Set Display W Timer Set Indicator
X Temperature Set Indicator
4
