Pioneer DEH-P6950IB operation manual Adjusting loudness, Using subwoofer output, Boosting the bass

Section

02Operating this unit

+6 to –6 is displayed as the level is increased or decreased.

#You can then select another band and adjust the level.

5Press BAND to cancel the 7-band gra- phic equalizer adjustment.

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

Push MULTI-CONTROL right to select normal phase and Normal appears in the display.

Adjusting subwoofer settings

When the subwoofer output is on, you can ad- just the cut-off frequency and the output level of the subwoofer.

1Use MULTI-CONTROL to select Sub W.2.

# You can also select the subwoofer setting

menu by pressing SW on the unit.

# When the subwoofer output is on, you can se-

1Use MULTI-CONTROL to select LOUD.

2Press MULTI-CONTROL to turn loudness

on.

Loudness level (e.g., Mid) appears in the dis-

play.

# To turn loudness off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to select a desired level.

Each time MULTI-CONTROL is pushed left or right, level is selected in the following order: Low (low)—Mid (mid)—High (high)

Using subwoofer output

This unit is equipped with a subwoofer output which can be turned on or off.

lect Sub W.2.

2Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order: 50Hz—63Hz—80Hz—100Hz—125Hz Only frequencies lower than those in the se- lected range are outputted from the subwoo- fer.

3Push MULTI-CONTROL up or down to adjust the output level of the subwoofer. Each time MULTI-CONTROL is pushed up or down, subwoofer level increases or decreases. +6 to –24 is displayed as the level is increased or decreased.

1Use MULTI-CONTROL to select Sub W.1.

# You can also select the subwoofer setting menu by pressing SW on the unit.

2Press MULTI-CONTROL to turn subwoo- fer output on.

Normal appears in the display. Subwoofer out-

put is now on.

# To turn subwoofer output off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to select the phase of subwoofer output. Push MULTI-CONTROL left to select reverse phase and Reverse appears in the display.

Boosting the bass

Bass boost function boosts the bass level of sound lower than 100 Hz. The more the bass level is increased, the more the bass sound is emphasized and the entire sound becomes powerful. When using this function with the subwoofer, the sound under the cut-off fre- quency is boosted.

1 Use MULTI-CONTROL to select Bass.

#You can also select the bass boost setting by pressing and holding SW.

22 En