Pioneer DEH-P6950IB Selecting a track directly, Press Direct Track of entered number will play

	Section
Operating this unit	02

Disc loading slot

EJECT button

#To avoid a malfunction, make sure that no metal object comes into contact with the term- inals when the front panel is open.

2Insert a CD (CD-ROM) into the disc load- ing slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD (CD-ROM) has been inserted, press

SOURCE to select the built-in CD player.

# You can eject a CD (CD-ROM) by pressing

EJECT.

3Close the front panel.

4Push MULTI-CONTROL up or down to select a folder when playing a compressed

audio.

# You cannot select a folder that does not have

a compressed audio file recorded in it.

# To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

5To perform fast forward or reverse, push and hold MULTI-CONTROL left or

right.

# If you select Rough search, pushing and hold- ing MULTI-CONTROL left or right enables you to search every 10 tracks in the current disc (folder). (Refer to Searching every 10 tracks in the current disc or folder on page 15.)

6To skip back or forward to another track, push MULTI-CONTROL left or right.

Notes

!There is sometimes a delay between starting up disc playback and the sound being issued. When being read, Format read is displayed.

!If an error message such as ERROR-11 is dis- played, refer to Understanding error messages on page 51.

!When playing CD-EXTRA or MIXED-MODE CDs, compressed audio and CD-DA can be switched by pressing BAND.

!If you have switched between compressed audio and CD-DA, playback starts at the first track on the disc.

!When playing back VBR (variable bit rate) re- corded files, elapsed play time may not be dis- played correctly.

!When playing compressed audio, there is no sound on fast forward or reverse.

!Playback is carried out in order of file number. Folders are skipped if they contain no files. (If folder 01 (ROOT) contains no files, playback commences with folder 02.)

Selecting a track directly

When using the remote control, you can select a track directly by entering the desired track number.

!When audio files are being played back, you can select track in the current folder.

1 Press DIRECT.

Track number input display appears.

2Press 0 to 9 buttons to enter the desired

track number.

# You can cancel the input number by pressing

CLEAR.

3Press DIRECT.

The track of entered number will play.

#After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

English

En 13