Pioneer DEH-P6950IB operation manual Tuner, Basic Operations, Adjusting the volume

Section

02 Operating this unit

! External unit refers to a Pioneer product (such	Tuner
as one available in the future) that, although	Basic Operations
incompatible as a source, enables control of
basic functions by this unit. Two external units	Important
can be controlled by this unit. When two exter-
nal units are connected, the allocation of	If you are using this unit in North, Central or
them to external unit 1 or external unit 2 is	South America, reset the AM tuning step (see
automatically set by this unit.	Setting the AM tuning step on page 25).
! When this unit’s blue/white lead is connected	1 2 3	4	5
to the vehicle’s auto-antenna relay control
terminal, the vehicle’s antenna extends when
this unit’s source is turned on. To retract the
antenna, turn the source off.

Adjusting the volume

%Use MULTI-CONTROL to adjust the sound level.

6

1Band indicator

2Stereo (5) indicator

Shows when the selected frequency is being broadcast in stereo.

3LOC indicator

Shows when local seek tuning is on.

4Preset number indicator

5Signal level indicator

Shows the radio wave strength.

6Frequency indicator

1Press SOURCE to select the tuner.

2Press BAND to select a band.

Press BAND until the desired band is dis- played, FM-1, FM-2, FM-3 for FM or AM.

3To perform manual tuning, push MULTI-CONTROL left or right.

4To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

#You can cancel seek tuning by pushing MULTI-CONTROL left or right.

10 En