Pioneer DEH-P6950IB operation manual Built-in CD Player, Tuning in strong signals

Section
02		Operating this unit
	! Storing broadcast frequencies with BSM		Built-in CD Player
		may replace broadcast frequencies you	Basic Operations
		have saved using 1 to 6 on the remote con-
		trol.	The built-in CD player can play back audio CD
	1 Use MULTI-CONTROL to select BSM in		(CD-DA) and compressed audio (WMA/MP3/
			AAC/WAV) recorded on CD-ROM. (Refer to
	the function menu.
			page 52 for files that can be played back.)
	2 Press MULTI-CONTROL to turn BSM on.		Read the precautions with discs and player on
			page 51.
	Six strongest broadcast frequencies will be
	stored in the order of their signal strength.		1	2	3
	# To cancel the storage process, press
	MULTI-CONTROL again.
	3 Use MULTI-CONTROL to select the de-
	sired station.
	Turn to change the station; press to select.
	# You can also change the station by pushing
			5		4
	MULTI-CONTROL up or down.
			1 WMA/MP3/AAC/WAV indicator
	Tuning in strong signals		Shows the type of audio file currently playing
			when the compressed audio is playing.
	Local seek tuning lets you tune in only those
			2 Folder number indicator
	radio stations with sufficiently strong signals
			Shows the folder number currently playing
	for good reception.
			when the compressed audio is playing.
	1 Use MULTI-CONTROL to select Local in		3 Track number indicator
			4 Play time indicator
	the function menu.
			5 Bit rate/sampling frequency indicator
	2 Press MULTI-CONTROL to turn local		Shows the bit rate or sampling frequency of
	seek tuning on.		the current track (file) when the compressed
	# To turn local seek tuning off, press		audio is playing.
	MULTI-CONTROL again.		! When playing back VBR (variable bit
	3 Push MULTI-CONTROL left or right to		rate)-recorded WMA files, the average
			bit rate value is displayed.
	set the sensitivity.		! When playing back VBR (variable bit
	There are four levels of sensitivity for FM and		rate)-recorded MP3 files, VBR is dis-
	two levels for AM:		played instead of bit rate value.
	FM: Level 1—Level 2—Level 3—Level 4		1 Press OPEN to open the front panel.
	AM: Level 1—Level 2
	The Level 4 setting allows reception of only		Disc loading slot appears.
	the strongest stations, while lower settings let
	you receive progressively weaker stations.

12 En