Playing songs on iPod, Basic Operations

1Press LIST to switch to the file name list mode.

Names of files and folders appear in the dis- play.

2Use MULTI-CONTROL to select the de- sired file name (or folder name).

Turn to change the name of file or folder; press to play; push right to see a list of the

files (or folders) in the selected folder.

# You can also change the name of file or folder

by pushing MULTI-CONTROL up or down.

# To return to the previous list (the folder one

level higher), push MULTI-CONTROL left.

# If the folder/file number is more than 100, last

2-digit of the folder/file number is displayed.

# Number of the folders/files in the currently se- lected folder will be indicated on the right side of

the display.

# If you do not operate the list within about 30

seconds, the display is automatically returned to the ordinary display.

Playing songs on iPod

You can use this unit to control an iPod by using a cable (e.g., CD-I200), which is sold se- parately.

3 2

1Song number indicator

2Play time indicator

3Song time (progress bar)

1Connect the iPod to this unit. Playback will automatically start.

While the iPod is connected to this unit, PIONEER (or (check mark)) is displayed on

the iPod.

# Before connecting the dock connector of this unit to the iPod, disconnect the headphones from

the iPod.

# After the iPod has been connected to this

unit, press SOURCE to select the iPod.

# When removing the iPod from this unit, this unit is turned off.

2To perform fast forward or reverse, push and hold MULTI-CONTROL left or right.

3To skip back or forward to another song, push MULTI-CONTROL left or right.

Notes

!Read the precautions with iPod on page 53.

!If an error message such as ERROR-11 is dis- played, refer to Understanding error messages on page 51.

!Connect directly the dock connector of this unit to the iPod so that this unit works prop- erly.

En 17